Product Code: 3243

Universal Steering Column Slip Shaft Kit

$79.95

(1 customer review)

Looking for a budget-friendly DIY option to update or upgrade to a collapsible steering shaft?

This collapsible two-piece steering shaft can be used to update the solid one-piece OEM steering shaft in your Early Bronco. Also, a great addition if you are adding an aftermarket column. The two-piece shaft is nickel-plated and can collapse down to 24″ and extend to 36″ Shafts are made from 1″ DD x 3/4″ DD so the U joints will slide over them with no grinding or modifying.

*Both shafts will need to be cut to size allowing 3″ of travel to compensate for chassis to body movement and to allow room to collapse in case of a front impact accident. *

If you need U-joints, check out the list of U joints we offer below and select which ones you need in the drop-downs above the product copy. We offer a guide for which joints do what but you will need to verify the dimensions and configurations for your u-joints before ordering. We recommend no assumptions are made here as there are several boxes, columns, and shafts that can be mounted to an Early Bronco. If you assume or guess wrong, you will be responsible for return/exchange shipping and restocking fees. NOTE: Our sales & tech department cannot advise you which U joint to pick.

U JOINT PART# AND DESCRIPTION

3211 – 3/4-36 X 3/4 DD U-JOINT – MANUAL EB STEERING BOX TO 3/4″ STOCK SECTOR SHAFT OR 3243-COLLAPSIBLE SHAFT

3213 – 13/16-36X3/4DD U-JOINT – 73-77 EB PWR STEERING BOX TO 3/4″ STOCK SECTOR SHAFT OR 3243-COLLAPSIBLE SHAFT

3222 – 11/16-36X3/4DD U-JOINT – BORGESON POWER STEERING BOX PART#3226 TO 3/4″ STOCK SECTOR SHAFT OR 3243-COLLAPSIBLE SHAFT

3223 – 3/4DD X 1DD – CONNECT PART# 3243-COLLAPSIBLE SHAFT TO 3/4 SHAFT AT FIREWALL

NOTE: This will require cutting, grinding, and drilling. We recommend the factory or aftermarket shaft is removed from the vehicle before it is modified

Don’t see the U joint you need? We do not support the F-100 2wd or 78-79 Big Bronco power steering gearbox conversions. Are you adding an aftermarket steering column with a 1″ shaft at the firewall? Click here.

Weight 10 lbs
Dimensions 2 × 2 × 30 in

1 review for Universal Steering Column Slip Shaft Kit

  1. Alan Williamson

    Also to my knowledge the engine pulleys crank and water pump pulleys have never been changed since this Bronco has been in the family since 1971 when purchased.

Add a review

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top