865.938.6696

M-F 10-6 EST

You are here: Home > Bronco II 1984-1990
Choose a sub category:
Accessories Exterior Accessories Interior
Adapters Brakes
Bushings Cooling
Drivetrain Electrical
V8 Engine Swap Gas Tanks
Solid Axle Swap Steering
Suspension
The Early Bronco, Bronco II & Ranger Specialists
Since 1984, we've been unleashing the potential of these great vehicles with suspension upgrades, engine conversions and a wide range of accessories. Many have overlooked the value of this new generation of agile smaller trucks and SUVs. With years of experience in Early Broncos, we could see the potential in the Bronco II & Ranger. We have believed in these versatile rigs from the beginning and made Fords our one and only specialty.

The Basic History
The Ranger 4x4 debuted in 1982 as a two wheel drive model with a 2.3L and a 6.75" rear axle. In 1983, the four wheel drive version, as well as the Supercab, came onto the scene. Followed in 1984, by the Bronco II, both were offered with a Dana 28 front axle and a 7.5" rear. The Bronco II came with the 2.8L carbureted V6. Rangers were powered by either a 2.3L four cylinder or the V6. In '86, the V6 increased in size to a 2.9L, and became fuel injected. Along with a mild front end restyle in '89, a 170 hp 4.0L V6 became optional in the Ranger, and the axles in these trucks were upgraded to a Dana 35 front, and an 8.8" Rear. In 1989, both the Ranger and Bronco II received facelifts in the form of a new front clip and interior design. The Bronco II continued on with the 2.9L until '90, when it was replaced by the Explorer.

The Explorer debuted with the '91 model year, with the 4.0L as the only available engine. They also featured the Dana 35 front end, and the 8.8 rear, with the leaf springs under the axle. In '93, the Ranger received another facelift with a new body style. In '95 Ford redesigned the Explorer with A-arm/Torsion Bar front suspension, with a redesigned engine crossmember to ease the installation of the 215 hp 5.0L V8.

For '98, a new 205 hp single overhead cam (SOHC) 4.0 became optional. The Ranger redesign came in '98, when it received the same suspension changes, but continued with the optional 170 hp 4.0L engine. Due to the complexity and variety of options on of these years, we have no plans to design suspension systems for them. We have our hands full with 1966-97 model years at this point!
Sort By:
Page of 13
3/4"-16 Jam Nut for 3/4" Rod End Heim Joint Bung Suspension Steering Custom Fab Link Bung
3/4"-16 Jam Nut for 3/4" Rod End
Our Price: $3.00

We are now offering the great high quality components from our suspensions separately. These high quality Rod Ends feature a tough selflubricating,
self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. Jam nuts sold separately.
Weld in adapters are the same we use for our Radius Arms, 4 link Suspensions and Torque Tamers.
1.25"-12 Jam Nut for 1" Rod End Heim Joint Suspension Steering Custom Fab Bung Link
1.25"-12 Jam Nut for 1" Rod End
Our Price: $4.00

We are now offering the great high quality components from our suspensions separately. These high quality Rod Ends feature a tough selflubricating,
self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. Jam nuts sold separately.
Weld in adapters are the same we use for our Radius Arms, 4 link Suspensions and Torque Tamers.
Duff Tuff American US Flag License Plate Tin Aluminum Tag
Duff Tuff American Flag License Plate
Our Price: $10.00
Sale Price: $7.50
You save $2.50!

Proudly mark your rig with a cool flowing American flag aluminum license plate with a Duff Tuff logo! Aluminum tag with embossed stars and permanent baked on finish
6 x 12" Universal mounting slots.
Blue Polyurethane Coil Spring Seats Ford Bronco II, 83-97 Ranger, 91-94 Explorer, pair
Urethane Coil Spring Seats Bronco II, 83-97 Ranger, 91-94 Explorer
Our Price: $8.25

Blue Polyurethane Coil Spring Seats Bronco II, 83-97 Ranger, 91-94 Explorer, pair. Included in our Suspension Systems but also sold separately.
Water Pump Bypass Hose V8 Engine Conversion 90° thermostat Ford Small Block
90 Water Pump Bypass Hose, V8
Our Price: $11.85

Water Pump Bypass Hose with a 90 bend molded in to go with our 90 Thermostat for all 289/302/351W V8. Necessary for most Bronco II, 83-97 Ranger or 91-94 Explorer V8 Conversions.
Poly Urethane Leaf Spring Shackle Bushings Bronco II Ford Ranger
Leaf Spring Shackle Bushings Bronco II, Ranger
Our Price: $15.00

Replacement blue polyurethane shackle bushings for Bronco II & Ranger.
K&N Air Filter Cleaning/Recharger Kit
K&N Air Filter Cleaning/Recharger Kit
Our Price: $15.00

Kit contains K&N air filter cleaner and air filter oil for cleaning any K&N Air Filter. Restores air flow efficiency so your K&N air filter performs like new!
3/4" Weld-in Threaded Rod End Adapter (1.25"ID) Heim Joint Steering Suspension Custom Fabrication Link Tube Bung
3/4" Weld-in Threaded Rod End Adapter (1.25"ID)
Our Price: $15.00

We are now offering the great high quality components from our suspensions separately. These high quality Rod Ends feature a tough selflubricating,
self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. Jam nuts sold separately.
Weld in adapters are the same we use for our Radius Arms, 4 link Suspensions and Torque Tamers.
Replacement Blue Polyurethane Bushing set Classic Traction Bars Early Classic Ford Bronco Ranger 5300, 5301, 5302, 5303, 5304, 5305,5306
Replacement Bushing Set for Classic Traction Bars
Our Price: $15.95

Replacement Blue Polyurethane Bushing set for our all of our over the axle Classic Traction Bars 5300, 5301, 5302, 5303, 5304, 5305,5306. One set does both sides.
Sway Bar Bushings Front Ford Bronco II 1" diameter 2.5" tall
Sway Bar Bushings Front Bronco II 1" diameter 2.5" tall
Our Price: $19.75

Blue Polyurethane Front Sway Bar Bushings, Bronco II 1" diameter 2.5" tall