865.938.6696

M-F 10-6 EST

You are here: Home > Early Bronco 1966-1977 > Accessories Exterior > Bumpers
Sort By:
Page of 2
Bolt Set W/Nuts for Chrome Bumper, 1966-77 Classic Early Ford Bronco OEM Stock
Bolt Set W/Nuts for Chrome Bumper, 1966-77 Bronco
Our Price: $12.00

Replace your old rusty bumper bolts with this new STAINLESS bolt set!
Trail Sac Storage Bag Trash Bag
Duff Tuff Trail Sac Mesh Storage Bag
Our Price: $40.00

Celebrate Duff's 50th anniversary with our new Fifty Bucking Years logo Trail Sac! The super durable vinyl-coated polyester mesh bag with a gussetted bottom is great for those of us who pick up trash on the trails but don't want it leaking in the rig. Or to carry your sandy beach items or muddy trail gear such as tow straps & other recovery items. Includes two ball bungees for attaching to a multitude of spots or add the optional 48" carabiner bungee to attach it around your spare. Easy to clean with the hose, it is even the perfect size to clip in the floor mat holders at the car wash. Comes in black, blue, red, orange, yellow and pink. The material is mildew and fade resistant and is strong enough to resist rips and tears from branches on the trail and flying debris on the road. Made in the USA with 5 year Manufacturer Limited Warranty.

TrailSac is a great solution for Jeepers looking for exterior mounted storage space. Perfect for trash, trail gear or anything that you may want to keep with you but not inside your Jeep. This super durable and easy to clean mesh bag comes in all of SPIDERWEBSHADE signature colors. In addition, its a great way to add another piece of functional flare to your rig!

Note : Shown with optional SpiderWebShade TrailSacCord 48″ carabiner bungee (available for purchase separately).

- See more at: https://www.spiderwebshade.com/jeep-products/accessories/trailsac/#sthash.pGO3sSBv.dpuf

railSac is a great solution for Jeepers looking for exterior mounted storage space. Perfect for trash, trail gear or anything that you may want to keep with you but not inside your Jeep. This super durable and easy to clean mesh bag comes in all of SPIDERWEBSHADE signature colors. In addition, its a great way to add another piece of functional flare to your rig!

Note : Shown with optional SpiderWebShade TrailSacCord 48″ carabiner bungee (available for purchase separately).

- See more at: https://www.spiderwebshade.com/jeep-products/accessories/trailsac/#sthash.pGO3sSBv.dpuf

railSac is a great solution for Jeepers looking for exterior mounted storage space. Perfect for trash, trail gear or anything that you may want to keep with you but not inside your Jeep. This super durable and easy to clean mesh bag comes in all of SPIDERWEBSHADE signature colors. In addition, its a great way to add another piece of functional flare to your rig!

Note : Shown with optional SpiderWebShade TrailSacCord 48″ carabiner bungee (available for purchase separately).

- See more at: https://www.spiderwebshade.com/jeep-products/accessories/trailsac/#sthash.pGO3sSBv.dpuf

railSac is a great solution for Jeepers looking for exterior mounted storage space. Perfect for trash, trail gear or anything that you may want to keep with you but not inside your Jeep. This super durable and easy to clean mesh bag comes in all of SPIDERWEBSHADE signature colors. In addition, its a great way to add another piece of functional flare to your rig!

Note : Shown with optional SpiderWebShade TrailSacCord 48″ carabiner bungee (available for purchase separately).

- See more at: https://www.spiderwebshade.com/jeep-products/accessories/trailsac/#sthash.pGO3sSBv.dpuf
2" Receiver Trailer Hitch, 1966-77 Classic Early Ford Bronco
Receiver Hitch, 1966-77 Bronco
Our Price: $139.95

This 2" receiver is a Class II hitch, 3500 lb. capacity, 300 lb. tongue weight. Slips into the ends of the frame, mounts using original bolt holes. Can be used front or rear. Fits 66-77, 76-77 require slight modification to the gas tank skid plate. Black Powder coated. DOES NOT INCLUDE RECEIVER INSERT OR PIN. Note: Due to frame mount changes the #4905 will not work with our Pre-Runner bumpers.
Reproduction Chrome Bumper Ft or Rear 1966-77 Classic Early Ford Bronco
Reproduction Chrome Bumper, Ft or Rear, 1966-77 Bronco
Our Price: $159.95

Reproduction original style chrome bumper fits front or rear, 66-77 Ford Broncos. For new hardware, we recommend our stainless steel bumper bolt kit, part number 4967. Note that all packages over 48" are now assessed a $10.85 added handling fee by the ground freight companies.
Gas Can Rack Carrier Duff Bumpers 1966-77 Early Classic EB Bronco BII Bronco II Ford
Gas Can Carrier for Duff Carrier Bumpers
Our Price: $249.95

Add the optional, driver’s side mounted, 5 gallon can carrier to your Duff Carrier Bumper. Made with the same stout material and features as our tire carrier bumper. Fits most plastic and metal 5 gallon “Gerry” cans. Can is removable through the back or front. (Not through cooler carrier like some.) Includes Hinge and Cam Latch with Brass Oilite Bushings. Cooler rack option available at additional charge (PN 4982B). (NOTE: Cooler rack cannot be added to Bronco II bumper due to angle of lift gate.)
Pre-Runner Front Rear Low Profile Receiver Pre-Runner Tube Bumper, 1966-77 Classic Early Ford Bronco
Pre-Runner Receiver Bumper, 1966-77 Bronco
Our Price: $329.00

Our Rear Pre-Runner Bumper is constructed of 2" x .120 wall tubing, features a gusseted and reinforced 2" receiver and is quick and easy to install using your original frame bolts. Available in stock or body lifted version to help offset the gap left when adding a 1-2" body lift. If you have a body lift, please note it in the comments section when you order (1" or 2" body lift offset available). All bumpers ship bare and must be final prepped and finished to your liking. We will contact you with shipping rates.
Pre-Runner Tube Bumper, 1966-77 Early Ford Classic Bronco
Pre-Runner Bumper, 1966-77 Early Bronco
Our Price: $399.00

Easy to install using your original frame bolt holes
•2” diameter .120 (1/8”) wall steel tubing
•Reinforced steel plate Dufflector Ends protect fenders
•Sits close to the body to maximize approach & departure angles
•Standard dual light tabs on the front center hoop
will fit up to a 9” light mounted up or down
All bumpers ship bare and must be final prepped and finished to your liking

One version for both body lifted or not. Shown on Silver with 2" Body Lift, on Teal Green Bronco stock.
We will contact you with shipping rates.
Early Classic 1966-77 Ford Bronco Rear Plate Bumper
Early Bronco Rear Plate Bumper, No Pivots
Our Price: $425.00

Our plate bumper was designed with form and function in mind. Constructed of a combination of 3/16” and 1/4” plate for maximum strength without too much weight in a design created to maximize ground clearance and departure angle. 1/4” plate wraps around, protecting the lower quarters. This version features the same 2” receiver hitch (with easily accessible pin) and laser cut jacking points as our carrier bumper but without the pivots for those who don't intend on running any carriers on the bumper.
All bumpers ship bare and must be final prepped and finished to your liking. This bumper also available as a "Smoothy", with visible inner welds ground flush (PN 4942). We will contact you with shipping rates.
smooth  plate steel bumper early bronco ford street
Smoothie Plate Bumper, 1966-77 Ford Bronco
Our Price: $475.00
Sale Price: $425.00
You save $50.00!

A new version of our popular plate bumper, but without a winch mount, and the welds ground smooth*, for those who want a clean look for a street rig. Fabricated of 3/16" plate steel with 1/4" frame mounts and end plates (with etched JD logo), we put strength where it is needed, but avoid too much weight. Options include shackle mounts (also can be used for tow bar mounts), jacking points*, and a center hoop**. We also include the etched winch opening, just in case you want to "convert" in the future***. This bumper fits stock to 2" body lift without modification. Shown on Hobby Horse, which has a 3/4" body lift.

*Note that all exterior welds are ground on these for an extra clean look. This does not include the "knockout" sections that are left in place to finish to your liking.

**Available with a center hoop option. It has two light tabs spaced for a pair of round lights or up to a 13" light bar. Please note that having us weld on the hoop adds about double to the cost of freight, depending on where you are located. As an alternative, we offer the DIY option of the hoop separately, this will also allow anyone with one of our bumpers already to retrofit it.

***We suggest that you not weld up the knockouts. Instead, metal finish them with the rest of the bumper before final coating. This way, you will always be able to make changes if you see fit.

All bumpers ship bare and must be final prepped and finished to your liking. We will contact you with shipping rates.
Winch Plate Bumper 1966-77 Classic Ford Early Bronco
Winch Plate Bumper, 1966-77 Early Bronco
Our Price: $475.00

Our plate steel winch bumper is designed for up to a 9500 pound winch. Designed to maximize your approach angle yet with the lowest possible winch mount height for maximum air flow to the radiator. Constructed of a combination of 3/16” and 1/4” plate for maximum strength without too much weight. 1/4” plate wrap around protection for lower fenders was recently revised to be more angled and include "JD" laser etched detail. Laser cut openings for jacking points and attachment points for shackles or tow bar. Same model fits with or without body lift.

Now also available with optional center hoop and/or kicker bars. The center hoop has two light tabs spaced for a pair of round lights or up to a 13" light bar. Please note that having us weld on the hoop adds about double to the cost of freight, depending on where you are located. As an alternative, we offer the DIY options, this will also allow anyone with one of our bumpers already to retrofit it.

All bumpers ship bare and must be final prepped and finished to your liking. (Sorry, pink sparkle powder coat is not available ;-)) We will contact you with shipping rates.