|
|
|
|
|
|
14lb Aluminum Radiator Cap, Copper Brass Rad
|
Our Price: $9.00
Sale Price: $4.50
You save $4.50!
|
|
|
14lb Radiator cap for copper/brass radiators
|
|
|
|
|
|
|
|
|
|
90° Water Pump Bypass Hose
|
|
Our Price: $10.50
|
|
|
Water Pump Bypass Hose with a 90° bend molded in to go with our 90° Thermostat for your Bronco II, 83-97 Ranger or 91-94 Explorer V8 Conversion.
|
|
|
|
|
|
|
|
|
|
90° Thermostat Housing
|
|
Our Price: $24.95
|
|
|
Thermostat housing with a 90° outlet for your Early Bronco, Bronco II, 83-97 Ranger or 91-94 Explorer V8/5.0 Conversion.
|
|
|
|
|
|
|
|
|
|
V8 Upper Radiator Hose Bronco II
|
|
Our Price: $25.25
|
|
|
Lower Radiator Hose to go with our Aluminum Radiator on a V8 conversion in a Bronco II, 83-97 Ranger or 91-94 Explorer.
|
|
|
|
|
|
|
|
|
|
V8 Lower Radiator Hose Bronco II
|
|
Our Price: $25.25
|
|
|
Lower Radiator Hose to go with our Aluminum Radiator on a V8 conversion in a Bronco II, 83-97 Ranger or 91-94 Explorer.
|
|
|
|
|
|
|
|
|
|
5.0 Upper Radiator Hose for Serpentine B2, R, Explorer
|
|
Our Price: $25.25
|
|
|
Upper Radiator Hose for our Aluminum Radiator with a 5.0 conversion in a Bronco II, 83-97 Ranger or 91-94 Explorer with a Serpentine Belt System.
|
|
|
|
|
|
|
|
|
|
Billet Aluminum Radiator Cap, 16lb.
|
Our Price: $29.95
Sale Price: $26.95
You save $3.00!
|
|
|
Give your aluminum radiator a finished look with this billet cap. A 16lb. pressure cap is siliconed inside the finished billet cap. This allows you to replace the pressure cap if it is ever to fail.
|
|
|
|
|
|
|
|
|
|
Lower Radiator Brackets
|
|
Our Price: $34.95
|
|
|
These brackets are needed when going from a 6 to a V8, or if your stock ones are rusted. “L” brackets work with stock or 4-core radiators & must be welded on. Shown with #3105 kit also needed to install a 4-core. #3111 set are extended 2” for body lifted vehicles.
|
|
|
|
|
|
|
|
|
|
4 Core Stainless Radiator Brackets, 1966-77 Bronco
|
Our Price: $44.95
Sale Price: $39.95
You save $5.00!
|
|
|
These stainless brackets come with black rubber insulating bushings. Sized for the added depth of the 4-core radiator and are needed for installation. Will not fit 3-cores.
|
|
|
|
|
|
|
|
|
|
Bilt Cool Ventilated Stainless Inner Fender Panel Set, 1966-77 Bronco
|
Our Price: $99.95
Sale Price: $84.95
You save $15.00!
|
|
|
16 gauge brushed Stainless Bilt Cool panels replace the vertical center section of your inner fenders--letting the hot air escape from around the headers or manifolds. Some people completely remove the inners but using these leaves the original structure intact for front clip strength. Gives a nice finished look to your wells and provides a bit of a barrier against debris. Lowers engine temperature approximately 10°.
|
|
|
|
