|
|
|
|
|
|
Bolt Set W/Nuts for Chrome Bumper, 1966-77 Bronco
|
|
Our Price: $12.00
|
|
|
Replace your old rusty bumper bolts with this new STAINLESS bolt set!
|
|
|
|
|
|
|
|
|
|
Duff Tuff Skid Plate, Ford Bronco II, 83-92 Ranger, 91-94 Explorer
|
|
Our Price: $149.95
|
|
|
Back by popular demand! Our 1/8" aluminum Duff Tuff Skid Plate gives a finished look to your front end while adding extra protection for your radiator. Backed with a steel frame for strength, it's an easy install, bolting to the frame sway bar mounts and the front crossmember. Shown on our '84 Bronco II with Plate Winch Bumper, Roller Fairlead Light Bracket and KC Hilites Slim Lights sold separately.
|
|
|
|
|
|
|
|
|
|
Reproduction Chrome Bumper, Ft or Rear, 1966-77 Bronco
|
|
Our Price: $159.00
|
|
|
Reproduction original style chrome bumper fits front or rear, 66-77.
|
|
|
|
|
|
|
|
|
|
Gas Can Carrier for Duff Carrier Bumpers
|
|
Our Price: $220.00
|
|
|
Add the optional, drivers side 5 gallon can carrier to your Duff Carrier Bumper. Made with the same stout material and features as our tire carrier bumper. Fits most plastic and metal 5 gallon Gerry cans. Can is removable through the back or front. (Not through cooler carrier like some.) Includes Hinge and Cam Latch with Brass Oilite Bushings.
|
|
|
|
|
|
|
|
|
|
Pre-Runner Receiver Bumper, 1966-77 Bronco
|
|
Our Price: $319.00
|
|
|
Our Rear Pre-Runner Bumper is constructed of 2" x .120 wall tubing, features a gusseted and reinforced 2" receiver and is quick and easy to install using your original frame bolts. Available in stock or body lifted version to account for the extra gap left when adding a 2-3" body lift.
|
|
|
|
|
|
|
|
|
|
Ft. Prerunner Bumper 1983-88 Bronco II & Ranger
|
|
Our Price: $329.95
|
|
|
The basic first generation prerunner bumper is virtually unchanged from our previous design as it is still made from 2 and 1.5 diameter .120 (1/8) wall steel tubing with dual light tabs on the front center hoop, tabs to mount license plate and reinforcements to strengthen the stock frame. The sides of the bumper now feature a larger end cap on the tubes. All bumpers come bare.
|
|
|
|
|
|
|
|
|
|
Ft Pre-runner Bumper 1989-90 BII, 89-92 Ranger & 91-94 Explorer
|
|
Our Price: $379.95
|
|
|
Virtually unchanged from our previous design as it is still made from 2 and 1.5 diameter .120 (1/8) wall steel tubing with dual light tabs on the front center hoop, tabs to mount license plate and reinforcements to strengthen the stock frame. The sides of the bumper now feature a larger end cap on the tubes. All bumpers come bare. includes our Dufflector Ends to be either bolted or welded on with included bolts (not attached to keep shipping costs down). This gives the bumper a finished look and hides the unsightly body lines left behind when the factory plastic is removed.
|
|
|
|
|
|
|
|
|
|
Early Bronco Rear Plate Bumper, No Pivots
|
|
Our Price: $425.00
|
|
|
Our plate bumper was designed with form and function in mind. Constructed of a combination of 3/16 and 1/4 plate for maximum strength without too much weight in a design created to maximize ground clearance and departure angle. 1/4 plate wraps around, protecting the lower quarters. This version features the same 2 receiver hitch (with easily accessible pin) and laser cut jacking points as our carrier bumper but without the pivots for those who don't intend on running any carriers on the bumper.
|
|
|
|
|
|
|
|
|
|
Early Bronco Winch Plate Bumper
|
|
Our Price: $425.00
|
|
|
Our plate steel winch bumper is designed for up to a 9500 pound winch. Designed to maximize your approach angle yet with the lowest possible winch mount height for maximum air flow to the radiator. Constructed of a combination of 3/16 and 1/4 plate for maximum strength without too much weight. 1/4 plate wrap around protection for lower fenders. Laser cut openings for jacking points and attachment points for shackles or tow bar. Same model fits with or without body lift.
|
|
|
|
|
|
|
|
|
|
Winch Plate Bumper, 83-88 Bronco II & Ranger
|
|
Our Price: $425.00
|
|
|
Our plate steel winch bumper is designed for up to a 9500 pound winch. Designed to maximize your approach angle yet with the lowest possible winch mount height for maximum air flow to the radiator. Constructed of a combination of 3/16 and 1/4 plate for maximum strength without too much weight. 1/4 plate wrap around protection for lower fenders. Laser cut openings for jacking points and attachment points for shackles or tow bar. Same model fits with or without body lift.
|
|
|
|
