865.938.6696

M-F 10-6 EST

You are here: Home > Ranger 1983-97 > Accessories Interior
Sort By:
Page of 1
DUFFY Adjustable Manual Chrome Shifter Lever bronco
DUFFY Adjustable Manual Chrome Shifter Lever
Our Price: $47.95

Nostalgic DUFFY chrome lever for use with NV3550 manual shifter lever adapter #2141 or Duffy lever adapter for LOKAR shifter #2388.  Lever height can be adjusted by 2" for added comfort and dash clearance and will accept any shift knob with a 3/8"-16 thread, including Duff Billet knobs or Duffy traditional wood knobs.  To complete your install check out our line of shifter boots w/ trim rings and automatic shift indicators.
Brushed Billet Dash Knobs, 1966-77 Early Classic Ford Bronco Hot Rod Jeep Bling
Billet Dash Knobs, 1966-77 Bronco
Our Price: $54.95

Billet aluminum dash knobs in sets of 5 and also individual (for those needing an extra for flashers, choke or a lighter) are now available in standard billet and new two tone similar to factory knobs. Require permanent modification to "pull" knobs: heater temp, defrost & headlights (originals must be cut off.) Measure 1 1/8" diameter, shaft hole size 3/16" for those of you wondering for custom applications.  Include set screws.
DUFFY Lever Adapter For LOKAR Shifter bronco
DUFFY Lever Adapter For LOKAR Shifter
Our Price: $65.00

The automatic lever adapter is used when installing an original DUFFY'S chrome shift lever #2140 or any other aftermarket lever with two 3/8" holes with 7/8" spacing to be installed onto a LOKAR shifter.  Typically a LOKAR shifter has a button in the top of the shift knob that is depressed to select gears, but when using this adapter and a DUFFY'S chrome shift lever #2140 the entire lever is pushed down to select gears. This is what we are currently running in Loco with a C6.
14" Wide Angle Rearview Mirror 2" Rollbar Clamps Bronco Ford Jeep Suzuki Landcruiser Ranger 4x4 offroad Rear View
14" Wide Angle Rearview Mirror with 2" Rollbar Clamps
Our Price: $69.95

14" wide angle mirror attaches to two black anodized 2" billet clamps to mount to your roll cage. Gets the mirror off the glass (giving you a little better head room and view) and gives you a wide angle view as a bonus!
Tuffy Security Products 8" Series II Center Console without No Radio Compartment Deluxe 1966-77 Early Ford Bronco mounting kit
Tuffy 8" Series II Console No Radio Compartment, 1966-77 Bronco
Our Price: $219.95

Tuffy has built a name as being one of the toughest lock boxes in the industry. We offer their 16 gauge steel lock boxes with or without a separate box for a stereo or CB. Center consoles feature a built in padded arm rest, two large cup holders, Neoprene lid seal, convenience tray, removable inner shelf and their custom Pry-Guard Locking System with Cylindrical Lock. 8" is standard for Early Broncos, 10" will not allow stock Early Bronco seats to fold & tumble. Please measure your vehicle before ordering. Installation requires drilling through floorboard. INCLUDES EARLY BRONCO MOUNTING KIT AT NO ADDITIONAL CHARGE. Consoles are 16 1/2" high and 24" long.
Tuffy Security Products 8" Deluxe Center Console with Radio Compartment Deluxe Ford Bronco mounting kit 013
Tuffy 8" Deluxe Console with Radio Compartment
Our Price: $249.95

Tuffy has built a name as being one of the toughest lock boxes in the industry. We offer their 16 gauge steel lock boxes with or without a separate box for a stereo or CB. Center consoles feature a built in padded arm rest, two large cup holders, Neoprene lid seal, convenience tray, removable inner shelf and their custom Pry-Guard Locking System with Cylindrical Lock. 8" is standard to fit in Early Broncos. 10" will not allow stock Early Bronco seats to fold & tumble. Please measure your vehicle before ordering. INCLUDES BRONCO MOUNTING KIT with mounting brackets and Grade 8 hardware. Consoles are 16 1/2" high and 24" long.
8" Black Powder coated Techie Center Console
8" Black Techie Center Console
Our Price: $274.95

A great center console with lots of upgraded features and it’s Made in the USA!

This console has so many features that we thought of Inspector Gadget. Slots and spots and storage everywhere. Right up the alley for the techie with lots of electronics in their rig, it comes with two different front face choices-one plain and one with knock outs for adding switches for seat heaters, ARB’s or lights, 12v plugs, USB ports or audio inputs along with a bottom storage spot for an amp with vents.

A hydraulic strut to holds open the lid and the combination lock (don’t worry about losing a key), a drop down lock secures the rear opening lower drawer. Even an interior map/registration clip—this 8” wide black textured powder coated console’s features just keep going and going. 4 drink holders large enough to hold supersize and coffee mugs. Heavy duty high quality padded matte finish vinyl console.

Includes a bracket to fit the angled Bronco floor but will fit many other applications. Measures 29” (drink holder to drink holder) x 7 3/4” wide x 12 1/4” tall