Our plate bumper was designed with form and function in mind. Constructed of a combination of 3/16" and 1/4" plate for maximum strength without too much weight in a design created to maximize ground clearance and departure angle. 1/4" plate wraps around, protecting the lower quarters. A 2" receiver hitch (with easily accessible pin) and laser-cut jacking points can be combined with our proven cam latch tire, can carrier and cooler racks. Includes Jack/Tire Carrier and pivots on both sides for easy can carrier addition. Can carrier recently redesigned for a cleaner look. The laser-cut JD logo in plate steel replaces the previous strap design. Includes oil light bushings for smooth operating long-lasting function and our exclusive easy to use cam latch design.
You must add the can rack with pivot to be able to purchase the cooler rack when selecting your options.
KZ –
Team,
Upon receipt of the 68 Bronco rear bumper, I found it to be of excellent quality. I am in the process of modifying the frame in order to receive the bumper. It must have been modified years ago by a previous owner. I would suggest that a few questions be asked prior to building the bumper to ensure that the buyer is all set for installation. Frame modifications are possible and measurements of the frame should be confirmed prior to purchase. I am not suggesting that the bumper specifications be changed. But the buyer should return the frame to its original specification.
All in all, a good experience thus far.