Looking for a high quality All American made leaf spring for your Ford Ranger? This progressive rate 7 leaf pack spring has been #1 for over 20 years now with superior strength, maximum articulation, and ride quality, and Duff’s is proud to offer it exclusively with the #1 Ranger suspension systems on the market.
These premium springs come with standard features like Teflon wear pads, tapered ends, a built-in safety double wrap on the mainspring, and catch stops to prevent the spring from over articulating with our basic and premium Ranger suspension systems. Black polyurethane spring eye bushings with sleeves included. If you need shackle bushings and sleeves as well, those are listed above as an add-on.
These are the same springs used in our suspension systems sold here. Designed as a 5″ for the 83-97 Ford Ranger.
If you need pinion shims to adjust your pinion angle click here. If you need lift blocks for additional height click here.
NOTE: To use these as a 2.5-3″ lift, you will need to perform a “shackle flip”. We do not support the shackle flip. Please visit therangerstation.com for more information.
Our Ford Ranger leaf springs are designed to keep the truck level or above level as it came from the factory. If you add an aftermarket rear bumper, tire carrier, camper shell with roof rack, fuel transfer tank, or camping/overlanding gear stored in the bed. You may need to add lift blocks or re-arch your springs to compensate for the added load for your Ranger to ride level.
(NOTE: Does not work on BII due to differences in frame and bumper mounting brackets. For BII, see #5560.)
Kevin Smith –
Springs look correct and were delivered a day early.
Thanks,
Kevin