Broncos require this pair of silver zinc plated mounts to match up our #6310 “Pyramid” shaped progressive stops to the stock frame mounting holes. Ours have the correct offset to center the bump stop over the axle!
Product Code: 6311
Axle Bump Stop Mounting Plates 1966-77 Bronco
$41.95
Available on backorder
| Weight | 5 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
Todd Zuercher –
What many Bronco owners might not realize is that Duff’s mounting plates contain one key difference from many of the others (maybe all of them?) on the market today. They have the frame mounting holes offset so the plate is offset further back – and closer to centered on the axle housing. This means the bump stop hits the top of the axle housing instead of being pushed laterally towards the front like many others. With the bump stop hitting the top of the housing, it lasts much, much longer as it is longer subjected to shear forces that tend to ‘tear’ the bump stops from their mounts with the other brands.
The quality hardware (flat head Allen bolts recessed flush into the plates), oversized mounting studs, and quality plating are just icing on the cake.
Well done, James Duff!