Telephone _ James Duff, Inc.

865.938.6696

M-F 10-6 EST

You are here: Home > 2 Big 1978-1979 > Bushings
Sort By:
Page of 2
C- Bushings 2° Stock Height Dana 30 Dana 44 1966-77 Early Classic Ford Bronco
2 C-Bushing Kit, Set of 4, 1966-79 Bronco, F150 and Solid Axle Swaps
Our Price: $49.95

With positive caster adjustment built in, our C bushings will help recover the steering control lost from lift kits and wear and tear. High quality Black polyurethane bushings. Fit 66-79 Broncos, F100 & F150s The best way to determine which ones you need is with a front end alignment but our experience has lead us to the following general applications:

1966-77 Bronco with stock arms:

#6002 2 C Bushings, stock height
#6004 4 C Bushings, 1 - 2 1/2 lift
#6007 7 C Bushings, 3+ lift

1966-77 Bronco with our Long Travel Radius Arms with 4.25 caster built in to the arms:
3.5 lift: #6004 4 C Bushings
5.5" lift: #6007 7 C Bushings

78-79 Bronco/F150 with our #5351 Long Travel Radius Arms with 4.25 built in:
2-4 lift: #6002 2C Bushings
5-6 lift: #6004 4C Bushings
6+ lift: #6007 7 C Bushings

80-96 Bronco SAS:
Same as 78-79 Bronco but they will vary depending on what degree the C-Wedges are welded onto the housing.

Bronco II & 83-97 Ranger Dana 44 SAS with our Long Travel Radius Arms:
3-4 lift: #6004 4C Bushings
5+ lift: #6007 7 C Bushings


more info
C- Bushings 4° 1"-2 1/2" Lift (4) Dana 30 Dana 44 1966-77 Classic Early Ford Bronco
4 C-Bushings, Set of 4, 1966-79 Bronco, F150 and Solid Axle Swaps
Our Price: $49.95

With 4 of positive caster adjustment built in, our C bushings will help recover the steering control lost from lift kits and wear and tear. High quality Black polyurethane bushings. Fit 66-79 Broncos, F100 & F150s The best way to determine which ones you need is with a front end alignment but our experience has lead us to the following general applications:

1966-77 Bronco with stock arms:

#6002 2 C Bushings, stock height
#6004 4 C Bushings, 1 - 2 1/2 lift
#6007 7 C Bushings, 3+ lift

1966-77 Bronco with our Long Travel Radius Arms with 4.25 caster built in to the arms:
3.5 lift: #6004 4 C Bushings
5.5" lift: #6007 7 C Bushings

78-79 Bronco/F150 with our #5351 Long Travel Radius Arms with 4.25 built in:
2-4 lift: #6002 2C Bushings
5-6 lift: #6004 4C Bushings
6+ lift: #6007 7 C Bushings

80-96 Bronco SAS:
Same as 78-79 Bronco but they will vary depending on what degree the C-Wedges are welded onto the housing.

Bronco II & 83-97 Ranger Dana 44 SAS with our Long Travel Radius Arms:
3-4 lift: #6004 4C Bushings
5+ lift: #6007 7 C Bushings


more info
C Bushings 7° Lift 1966-77 Classic Early Ford Bronco Dana 30 44
7 C-Bushings, Set of 4, 1966-79 Bronco, F150 and Solid Axle Swaps
Our Price: $49.95

With positive caster adjustment built in, our C bushings will help recover the steering control lost from lift kits and wear and tear. High quality Black polyurethane bushings. Fit 1966-79 Broncos, F100 & F150s The only way to be certain which ones you need is with a front end alignment but our experience has lead us to the following general recommendations:

1966-77 Bronco with stock arms:

#6002 2 C Bushings, stock height
#6004 4 C Bushings, 1 - 2 1/2 lift
#6007 7 C Bushings, 3+ lift

1966-77 Bronco with our Long Travel or T-rex Radius Arms with 4.25 caster built in to the arms:
3.5 lift: #6004 4 C Bushings
5.5" lift: #6007 7 C Bushings

78-79 Bronco/F150 with our #5351 Long Travel Radius Arms or T-rex arms with 4.25 built in:
2-4 lift: #6002 2C Bushings
5-6 lift: #6004 4C Bushings
6+ lift: #6007 7 C Bushings

80-96 Bronco SAS:
Same as 78-79 Bronco but they will vary depending on what degree the C-Wedges are welded onto the housing.

Bronco II & 83-97 Ranger Dana 44 SAS with our Long Travel or T-rex Radius Arms:
3-4 lift: #6004 4C Bushings
5+ lift: #6007 7 C Bushings


more info
Strut Radius Trailing Arm Bushings 1966-79 Classic Early Ford Bronco Truck F100-F350
Strut Arm Bushings 1966-79 Bronco F100-F350
Our Price: $19.95

Rubber strut arm bushings allow wheel movement backward and forward, which creates the pulling associated with panic stops. Our durable blue polyurethane bushings hold the front end firmly in place for greater control.


more info
Polyurethane Track Bar Bushings 1966-75 Classic Early Ford Bronco, 78-79 Bronco & 66-79 F100-150 Trucks
Track Bar Bushings 1966-75 Bronco, 78-79 Bronco & 66-79 F100-150
Our Price: $11.95

Stock bushings go away fast --kissing curbs will even do it! Worn out tracking bar bushings are a primary cause of front end shimmy. These are two piece polyurethane, with metal sleeves for easy installation. Takes only minutes to change them out.
These are included in our 14 piece bushing kits.
(Note: #6109 is for 76-77 Broncos which have an oval bushing at one end of the stock track bar. If your track bar is "aftermarket", please call to be sure that you are ordering the correct kit.)

more info
License Plate Bolts
License Plate Bolts
Our Price: $34.50

When replacing a factory bumper with aftermarket or running a gas can carrier bumper, the factory license plate bracket and lights are blocked.  These bolts both hold the plate on and illuminate it, keeping you legal. more info
1" x 1.25" Diameter Rod End Heim Joint Steering Suspension Link Fabrication Custom
1" x 1.25" Diameter Rod End
Our Price: $55.00

We are now offering the great high quality components from our suspensions separately. These high quality Rod Ends feature a tough selflubricating, self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. Jam nuts sold separately. Weld in adapters are the same we use for our Radius Arms, 4 link Suspensions and Torque Tamers.



more info
3/4" Rod End Heim Joint Steering Suspension Link Custom Fabrication
3/4" Rod End
Our Price: $25.00

We are now offering these high quality components from our suspensions individually. These high quality Rod Ends feature a tough, self-lubricating, self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. Jam nuts (PN 8722) and weld-in adapters (PN 8712) are sold separately. These are the same high quality parts we use for items like our Extended Travel Radius Arms (PN 5350 and 5351), heim steering systems (PN 5640), torque tamers (PN 532X) and 4-links (PN 536X), although sizes may vary depending upon the application.



more info
1.25"-12 Jam Nut for 1" Rod End Heim Joint Suspension Steering Custom Fab Bung Link
1.25"-12 Jam Nut for 1" Rod End
Our Price: $4.00

We are now offering the great high quality components from our suspensions separately. These high quality Rod Ends feature a tough selflubricating, self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. Jam nuts sold separately. Weld in adapters are the same we use for our Radius Arms, 4 link Suspensions and Torque Tamers.


more info
3/4"-16 Jam Nut for 3/4" Rod End Heim Joint Bung Suspension Steering Custom Fab Link Bung
3/4"-16 Jam Nut for 3/4" Rod End
Our Price: $3.00

We are now offering these high quality components from our suspensions individually. These jam nuts work with our high quality Rod Ends (#8702), which feature a tough, self-lubricating, self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. The rod ends and weld-in adapters (# 8712) are sold separately. These are the same high quality parts we use for items like our Extended Travel Radius Arms (#5350 and #5351), heim steering systems (#5640), torque tamers (#532X) and 4-links (#536X), although sizes may vary depending upon the application.


more info