Telephone _ James Duff, Inc.

865.938.6696

M-F 10-6 EST

You are here: Home > Early Bronco 1966-1977 > Accessories Interior
Sort By:
Page of 6
Mastercraft 40" Bench Suspension Seat
Mastercraft 40" Bench Suspension Seat
Our Price: $574.95

The Mastercraft bench seat is made with same quality components as the front buckets but with room for two and it fits perfectly between the wheel-wells. Rear seats feature 4 point harness slot, harness loops, available with or without adjustable headrests. Seat is 40” wide and requires drilling three holes for installation. Colors available by special order. more info
Mastercraft Baja RS Reclining Suspension Seat Bronco Ford Ranger Jeep
Mastercraft Baja RS Reclining Suspension Seat, each
Our Price: $499.95

The same high quality as their original suspension seats but with the added feature of a heavy duty 9 position recliner from tilt forward to full recline with a Billet Lever. Lower bolsters allow for up to a 40” waist in comfort while still providing support. Accommodates 5 point harnesses, anti-submarine slat and shoulder harness slats are standard, works best with most 3-point restraint systems. Shown in all black in Hobby Horse. Custom colors available for an additional charge, visit mastercraftseats.com to view different color options available for the standard price. Sold individually, specify right or left tilt mechanism. Require seat mounting brackets, sold separately. Ship UPS.

Options available include:

•Dirt Sports stitch pattern with vinyl inserts shoulder .

•Three position adjustable headrest is integrated into the steel frame. Cannot be added later.

•Schukra Adjustable Lumbar Support adjusts up to 3". Because it's mechanical, it will hold its form, unlike leaky air activated styles. Designate left or right for adjustment handles. Normally, we do left on driver and right on passenger so there is no interference with a center console.

•12V Seat Heaters are installed during seat assembly. Includes a complete harness long enough to run the switch to the dash or console (we wired them through the face of the Tuffy Console on Silver). High quality US Made units. Wonderful for winter wheeling, topless rigs with inadequate heat or those with low back problems.

•Seat Pocket. Add a pocket to the back of your seat to hold maps, bottles, hats, and more. Measures about 14" tall by 12.5" wide and features a rugged zipper closure.

more info
Black Vinyl Floor Mat-Complete, 1966-76 Early Classic Ford Bronco
Black Vinyl Floor Mat-Complete, 1966-76 Bronco
Our Price: $379.95

Textured black vinyl is contoured to fit floorboard. Complete kit is 3 pieces: the tailgate, the floor and the rear seam under the molding behind the front seats. Jute padding is under the front piece only. Minor trimming is needed for shifters and the gas tank switch. Wheel wells are not included.


more info
Complete Carpet Kit 1966-77 Early Classic Ford Bronco
Complete Carpet Kit 1966-77 Bronco
Our Price: $349.95

These are replacement carpet kits for the models that came with factory installed carpet. This plush carpet is molded to fit the floor boards. Trimming to fit shifters and around doors will be necessary. The front only kit covers from the firewall to just behind the front seats. The complete kit covers the whole floor in 2 sections, has 2 wheel well covers and a piece to cover the tailgate. Wheel well pieces are designed to be tucked under the original interior trim panels. Please specify single or dual tanks and what year Bronco. more info
Mastercraft Rubicon Suspension Racing Seat 1966-77 Classic Early Ford Bronco Ranger Jeep
Mastercraft Rubicon Seat
Our Price: $329.95

The Rubicon is a low profile suspension seat with a fixed headrest, 5 point seat belt holes or loops to secure shoulder belts in place, and a slightly more upright seating angle than Sportsman. (Overall front to back is only 25" ).  Containment height/side bolster (6.5") and overall height of 34"

The floor mounting area is 16” from front to back and 14” wide, seating height is approx. 3.5” from the floor. Require hard mounting with custom brackets or the seat mounting brackets with sliders #4739, sold separately. Seat Savers (removable covers) also sold separately.

Options available include:

•Three position adjustable headrest is integrated into the steel frame. Cannot be added later.

•Schukra Adjustable Lumbar Support adjusts up to 3". Because it's mechanical, it will hold its form, unlike leaky air activated styles. Designate left or right for adjustment handles. Normally, we do left on driver and right on passenger so there is no interference with a center console.

•12V Seat Heaters are installed during seat assembly. Includes a complete harness long enough to run the switch to the dash or console (we wired them through the face of the Tuffy Console on Silver) . Wonderful for winter wheeling, topless rigs with inadequate heat or those with low back problems.

•Seat Pocket. 8.5x11" rear seat pocket can hold maps, bottles, hats, etc. Features a flap with Velcro closure.
more info
Tuffy Security Products 8" Rear Seat Lock Box 1966-77 Classic Early Ford Bronco
Tuffy 8" Rear Seat Lock Box, Black
Our Price: $299.95

Rear lock box is made from the same stout 16 gauge steel and offers their Pry-Guard Locking System and Neoprene seal. 9 5/8 x 33 7/8 wide x 11 3/8 tall. Fits great behind the Bronco seat. Comes in durable textured black powdercoat.




more info
8" Black Powder coated Techie Center Console
8" Black Techie Center Console
Our Price: $294.95

A great center console with lots of upgraded features and it’s Made in the USA!

This console has so many features that we thought of Inspector Gadget. Slots and spots and storage everywhere. Right up the alley for the techie with lots of electronics in their rig, it comes with two different front face choices-one plain and one with knock outs for adding switches for seat heaters, ARB’s or lights, 12v plugs, USB ports or audio inputs along with a bottom storage spot for an amp with vents.

A hydraulic strut to holds open the lid and the combination lock (don’t worry about losing a key), a drop down lock secures the rear opening lower drawer. Even an interior map/registration clip—this 8” wide black textured powder coated console’s features just keep going and going. 4 drink holders large enough to hold supersize and coffee mugs. Heavy duty high quality padded matte finish vinyl console.

Includes a bracket to fit the angled Bronco floor but will fit many other applications. Measures 29” (drink holder to drink holder) x 7 3/4” wide x 12 1/4” tall


more info
Mastercraft Sportsman Suspension Seat Ford Classic Early Bronco Jeep Ranger
Mastercraft Sportsman Seat, each
Our Price: $289.95

The Mastercraft Sportsman is a low profile suspension seat with a fixed headrest, 5 point seat belt holes or loops to secure shoulder belts in place, and a mid-height (5.5”) side bolster for easy entry and exit, while still offering security. We run these high quality US Made seats in both Hi Ho Silver and Loco. The floor mounting area is 16” from front to back and 14” wide, seating height is approx. 3.5” from the floor. Require hard mounting with custom brackets or the seat mounting brackets with sliders #4739, sold separately. Seat Savers (removable covers) also sold separately.

Options available include:

•Schukra Adjustable Lumbar Support adjusts up to 3". Because it's mechanical, it will hold its form, unlike leaky air activated styles. Designate left or right for adjustment handles. Normally, we do left on driver and right on passenger so there is no interference with a center console.

•12V Seat Heaters are installed during seat assembly. Includes a complete harness long enough to run the switch to the dash or console (we wired them through the face of the Tuffy Console on Silver). High quality US Made units. Wonderful for winter wheeling, topless rigs with inadequate heat or those with low back problems.

•Seat Pocket. Add a pocket to the back of your seat to hold maps, bottles, hats, and more! Measures about 14" tall by 12.5" wide and features a rugged zipper closure.
more info
Tuffy 10" Security Deluxe Stereo Center Console with Radio Slot Black Spice Charcoal Light Gray 033
Tuffy 10" Deluxe Security Console with Radio Slot
Our Price: $269.95

Tuffy has built a name as being one of the toughest lock boxes in the industry. We offer their 16 gauge steel lock boxes with or without a separate box for a stereo or CB. Center consoles feature a built in padded arm rest, two large cup holders, Neoprene lid seal, convenience tray, removable inner shelf and their custom Pry-Guard Locking System with Cylindrical Lock. 10" will not allow stock Early Bronco seats to fold & tumble. Please measure your vehicle before ordering. Requires drilling through floor boards. INCLUDES EARLY BRONCO MOUNTING KIT with hardware included AT NO ADDITIONAL CHARGE. 24”L (includes cup holder), 10”W, 18 1/2”H


more info
Tuffy 10" Security Series II Center Console without No Radio Slot, Black Early Bronco Ford Fullsize Bronco Truck
Tuffy 10" Series II Security Console no Radio Slot
Our Price: $249.95

Tuffy has built a name as being one of the toughest lock boxes in the industry. We offer their 16 gauge steel lock boxes with or without a separate box for a stereo or CB. Center consoles feature a built in padded arm rest, two large cup holders, Neoprene lid seal, convenience tray, removable inner liner and their custom Pry-Guard Locking System with Cylindrical Lock. Installation requires drilling through floorboard. 10" will not allow stock Early Bronco seats to fold & tumble. Please measure your vehicle before ordering. INCLUDES EARLY BRONCO MOUNTING KIT with Grade 8 hardware included AT NO ADDITIONAL CHARGE. 24”L (includes cup holder), 10”W, 16 1/2”H


more info