Telephone _ James Duff, Inc.

865.938.6696

M-F 10-6 EST

You are here: Home > Cooling
Sort By:
Page of 1
Water Pump Bypass Hose V8 Engine Conversion 90° thermostat Ford Small Block
90 Water Pump Bypass Hose, V8
Our Price: $11.85

Water Pump Bypass Hose with a 90 bend molded in to go with our 90 Thermostat for all 289/302/351W V8. Necessary for most Bronco II, 83-97 Ranger or 91-94 Explorer V8 Conversions.


V8 302 5.0 efi Engine Conversion Upper Radiator Hose Ford Bronco II Ranger
V8 Upper Radiator Hose Bronco II, Ranger
Our Price: $25.25

Upper Radiator Hose to go with our Aluminum Radiator on a V8 conversion in a Bronco II, 83-97 Ranger or 91-94 Explorer.


V8 302 5.0 efi Engine Conversion Lower Radiator Hose Ford Bronco II Ranger
V8 Lower Radiator Hose Bronco II, Ranger, Explorer
Our Price: $25.25

Lower Radiator Hose to go with our Aluminum Radiator on a V8 conversion in a Bronco II, 83-97 Ranger or 91-94 Explorer.


V8 302 5.0 efi Engine Conversion Upper Radiator Hose Ford Bronco II Ranger
5.0 Upper Radiator Hose for Serpentine B2, Ranger, Explorer
Our Price: $25.25

Upper Radiator Hose for our Aluminum Radiator with a 5.0 conversion in a Bronco II, 83-97 Ranger or 91-94 Explorer with a Serpentine Belt System.


90° Thermostat Housing Bronco Ranger Explorer Thermostat housing 90° outlet Early Bronco, Bronco II, 83-97 Ranger 91-94 Explorer V8/5.0 Conversion
90 Thermostat Housing
Our Price: $29.95

Thermostat housing with a 90 outlet for your 289 302 351W Small Block Ford V8 in Early Bronco, Bronco II, 83-97 Ranger or 91-94 Explorer V8/5.0 Conversion.


Billet Aluminum Radiator Cap, 16lb. 1966-77 Ford Classic Early Bronco
Billet Aluminum Radiator Cap, 16lb.
Our Price: $36.95

Give your aluminum radiator a finished look with this billet cap. A 16lb. pressure cap is siliconed inside the finished billet cap. This allows you to replace the pressure cap if it was ever to fail.


4 Core Stainless Radiator Brackets, 1966-77 Early Classic Ford Bronco
4 Core Stainless Radiator Brackets, 1966-77 Bronco
Our Price: $44.95

These stainless brackets come with black rubber insulating bushings. Sized for the added depth of the 4-core radiator and are needed for installation. Will not fit 3-cores. Measure 3.5" for reference for other applications.
3 Core Stainless Radiator Brackets, 1966-77 Early Classic Ford Bronco
3 Core Stainless Radiator Brackets, 1966-77 Bronco
Our Price: $44.95

These stainless brackets come with black rubber insulating bushings. Sized for the depth of the 3-core radiator and are needed for installation. Will not fit 4-cores. Measure 2.5" for reference for other applications.
Bilt Cool Ventilated Stainless Inner Fender Panel Set 1966-77 Classic Early Ford Bronco Cooling Overheating
Bilt Cool Ventilated Stainless Inner Fender Panel Set, 1966-77 Bronco
Our Price: $125.95

16 gauge brushed Stainless Bilt Cool panels replace the vertical center section of your inner fenders--letting the hot air escape from around the headers or manifolds.  Some people completely remove the inners but using these leaves the original structure intact for front clip strength. Gives a nice finished look to your wells and provides a bit of a barrier against debris. Lowers engine temperature approximately 10.
1966-77 66-77 Early Classic Vintage Ford Bronco V8 Aluminum Radiator 302 351w 289
V8 Aluminum Radiator, 1966-77 Ford Bronco
Our Price: $299.95

This 1966-77 Bronco V8 289/302/351W Aluminum Radiator has no epoxy, a fully TIG welded tank, and extra large 2-row 1 tubes that exceed 4 row efficiency and are 5-7 pounds lighter. Utilizes 3.5" deep (4-core style) stainless steel radiator brackets (PN 3124-4), which we include in the kit. An easy access, petcock-type drain is on the passenger side. Additionally, a heat-exchanger style automatic transmission cooler with 1/4"NPT fittings is built into the passenger side tank (plug the ports if you do not plan on using the cooler). Due to the size of the protective packaging, it ships as a 40 pound dimensional package via FedEx.