|
|
|
|
|
|
90° Water Pump Bypass Hose, V8
|
|
|
Water Pump Bypass Hose with a 90° bend molded in to go with our 90° Thermostat for all 289/302/351W V8. Necessary for most Bronco II, 83-97 Ranger or 91-94 Explorer V8 Conversions.
|
|
|
|
|
|
|
|
|
|
Alternator Adapter Bracket 351W
|
|
|
This bracket attach the 302 alternator to the 351W heads. They retain stock 302 mounts and use the same belts and pulleys. Shown with 3160 Power Steering Adapter.
|
|
|
|
|
|
|
|
|
|
Quik Latch Billet Air Cleaner Keeper
|
|
|
For decades, people have been securing the air cleaner to a carburetor with a wing nut. Spinning it on and off is slow and often results in dropping it! Replace it with a specially designed mini latch that is a perfect finishing touch to custom build. Requires modification to the air cleaner to fit the latch button. Will not work on stock carb without mod. Diameter of latch: 1.23” stud: 4.125”
|
|
|
|
|
|
|
|
|
|
Stage 8 Collector Bolts (6)
|
|
|
Ordinary Header bolts can be a real pain to keep tight due to the expansion and contraction that headers go through. No one likes getting in there and busting their knuckles if they don’t have to. We swear by these (not at them)! They use a patented locking system that won’t come loose.
|
|
|
|
|
|
|
|
|
|
90° Thermostat Housing
|
|
|
Thermostat housing with a 90° outlet for your 289 302 351W Small Block Ford V8 in Early Bronco, Bronco II, 83-97 Ranger or 91-94 Explorer V8/5.0 Conversion.
|
|
|
|
|
|
|
|
|
|
Dual Exhaust TBP Header Conversion Pipes, 1966-77 Bronco
|
|
|
Adapter pipes to exhaust kit to complete our dual exhaust system when using Tom's Bronco Parts long tube headers.
|
|
|
|
|
|
|
|
|
|
Heatshield Products Lava Wrap
|
|
|
Keep the heat off your floor boards, out the interior and reduce the risk of vapor lock by reducing radiant heat near the fuel lines with Heatshield Lava Wrap. Made in the USA Lava Wrap has all the same performance enhancements as a traditional heat wrap, but with the cool carbon fiber look and long life of fiber made of crushed volcanic rock. The lava rock wrap fiber is 25% stronger than fiberglass wraps along with being asbestos free and chemical, acid, water and mold resistant.
Wrapping Lava Wrap on a header and exhaust system maintains hotter exhaust gases, decreases gas density and allows the exhaust gases to flow through the system at increased velocities. Greater exhaust scavenging is produced, pulling intake gases through the cycle faster, helping to lower air-intake temperatures. This results in more horsepower and reduces radiant heat damage. Lava Wrap lowers under-hood temperatures by as much as 40%, further lowering intake air temperatures and creating even more power.
Withstands continuous temperatures of 1,200°F and intermittent 2,000°F. 2" wide roll, 1/16" thick, recommended to do 1/4" overlap. To determine how much you need for your custom exhaust, check out this handy calculator https://www.heatshieldproducts.com/exhaust-wrap-c...
|
|
|
|
|
|
|
|
|
|
Lokar 4 Barrel Carburetor Bracket & Return Springs for Throttle Cable
|
|
|
Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, and Demon 4 barrel carbs. Stainless bracket and dual stainless return springs are used to mount Lokar's Throttle Cable and Kickdown kits. Includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with an AOD transmission. Available in polished stainless or black stainless.
|
|
|
|
|
|
|
|
|
|
Premium Header Gaskets V8/5.0 289 302 351W
|
|
|
Unlike standard exhaust gasket material, these gaskets are 100% flexible graphite. This allows the gaskets to conform to warped flanges, giving them better sealing without deteriorating or cracking under excessive heat and pressure. Combine these premium header gaskets along with Stage 8 locking bolts for long lasting performance! For all small block Fords; V8 289 302 351W 5.0 5.8 Made in the USA
|
|
|
|
|
|
|
|
|
|
Premium Oil Pan 1 Piece Silicone Gasket Ford 351W
|
|
|
These great reusable silicone gaskets require no adhesive which= no mess! They have a steel framework to hold their shape and come with great little keepers that hold it to the block while you get the pan into place. PermaDryPlus by Fel-Pro.
|
|
|
|
