Telephone _ James Duff, Inc.

865.938.6696

M-F 10-6 EST

You are here: Home > Flaming River
Sort By:
Page of 2
Flaming River Column Connector Bronco tilt steering column
Aftermarket Steering Column Wiring Connector
Our Price: $19.95

Since cutting off the factory Bronco connector is necessary when installing a Flaming River or other aftermarket column, we decided to offer this trouble-free connector for an install that can be unplugged if needed, just like the original setup. This "female" wiring connector snaps right into the male connector on Flaming River, CPP, and other aftermarket steering columns. This allows for a nice clean wiring installation when combining your new column with your stock Ford wiring.  No electrical tape needed!
Column Mount bronco
Early Bronco Aftermarket Steering Column Mount
Our Price: $39.95

This steering column mounting bracket is for 66-77 Broncos using a Flaming River or any other 2" aftermarket or OEM tilt steering column. It mounts in place of the original under dash column mount, but its reduced diameter allows the new column to be positioned and held securely. Hardware included.
universal slip shaft kit Bronco tilt steering column
Universal Slip Shaft Kit
Our Price: $72.95

Use one of these collapsible steering shafts to update the OEM or aftermarket steering column system in your vehicle. This kit includes a 1" DD "hollow" shaft with a 3/4" DD "solid" slip shaft, in chromed mild steel. The slip-joint system allows for movement to compensate for chassis twist and eliminate binding, and to provide protection in the event of a front end collision. Overall length of 30-36" allows you to compensate for body lifts as well. Simple installation with shafts that you can easily cut to fit with a hacksaw, bandsaw, etc. (Note: Requires U-joints that must be ordered separately based upon your column and steering gear box requirements. Please call our office if you need assistance determining your needs before ordering.)
Flaming River DD stainless ujoint coupler 1" to 1" Bronco tilt steering column steering joint
Flaming River DD Stainless U-joint Coupler 1" to 1"
Our Price: $99.95

Flaming River steering universal joints are built from 303 Stainless Steel for its strength, superior corrosion resistance and shine. Their universal joints have a precision machined finish. Even the "satin" finish (sold here) looks great right out of the box! Or, you can order them in high polish by giving us a call. This 1DDx1DD joint can be used with Flaming River columns to connect to their or the James Duff universal collapsible steering shaft (PN3243 OR 3243-CPP). These joints are shipped directly from the manufacturer.
(A more economical, chromed steel version of this universal joint is also available, and usually in stock. Just give us a call for details.)
Flaming River DD stainless u-joint coupler 3/4-36 to 3/4DD Bronco tilt steering column steering joint
Flaming River DD stainless U-joint coupler 3/4-36 to 3/4DD
Our Price: $99.95

Flaming River steering universal joints are built from 303 Stainless Steel for its strength, superior corrosion resistance and shine. Their universal joints have a precision machined finish. Even the "satin" finish (sold here) looks great right out of the box! Or, you can order them in high polish by giving us a call.
This 3/4-36 x 3/4DD joint can be used with steering columns to connect their or the James Duff universal collapsible steering shaft (PN3243 OR 3243-CPP) to your stock steering gear box (be sure to measure your box's input shaft).
These joints are shipped directly from the manufacturer. (A more economical, chromed steel version of this universal joint is also available, and usually in stock. Just give us a call for details.)
Flaming River DD stainless ujoint coupler 1" to 1" Bronco tilt steering column
Flaming River DD Stainless U-joint Coupler 13/16-36 X 3/4 DD
Our Price: $99.95

Flaming River steering universal joints are built from 303 Stainless Steel for its strength, superior corrosion resistance and shine. Their universal joints have a precision machined finish. Even the "satin" finish (sold here) looks great right out of the box! Or, you can order them in high polish by giving us a call.
This 13/16-36 x 3/4DD joint can be used with steering columns to connect their or the James Duff universal collapsible steering shaft (PN3243 OR 3243-CPP) to your stock or aftermarket steering gear box (be sure to measure your box's input shaft).
These joints are shipped directly from the manufacturer. (A more economical, chromed steel version of this universal joint is also available, and usually in stock. Just give us a call for details.)
Flaming River DD stainless u-joint coupler 3/4 DD x 1 DD Bronco tilt steering column steering joint
Flaming River DD Stainless U-joint Coupler 3/4 DD x 1 DD
Our Price: $99.95

Flaming River steering universal joints are built from 303 Stainless Steel for its strength, superior corrosion resistance and shine. Their universal joints have a precision machined finish. Even the "satin" finish (sold here) looks great right out of the box! Or, you can order them in high polish by giving us a call.
This 3/4"DD x 1"DD joint can be used with steering columns to connect to their or the James Duff universal collapsible steering shaft (PN3243 OR 3243-CPP).
These joints are shipped directly from the manufacturer. (A more economical, chromed steel version of this universal joint is also available, and usually in stock. Just give us a call for details.)
Flaming River DD stainless u-joint coupler 11/16-36 X 3/4 DD Bronco tilt steering column steering joint
Flaming River DD Stainless U-joint Coupler 11/16-36 X 3/4 DD
Our Price: $99.95

Flaming River steering universal joints are built from 303 Stainless Steel for its strength, superior corrosion resistance and shine. Their universal joints have a precision machined finish. Even the "satin" finish (sold here) looks great right out of the box! Or, you can order them in high polish by giving us a call.
This 11/16-36 x 3/4DD joint can be used with steering columns to connect their or the James Duff universal collapsible steering shaft (PN3243 OR 3243-CPP) to your stock or aftermarket steering gear box (be sure to measure your box's input shaft).
These joints are shipped directly from the manufacturer. (A more economical, chromed steel version of this universal joint is also available, and usually in stock. Just give us a call for details.)
Flaming River steering wheel adapter 5 bolt Bronco tilt column
Flaming River Steering Wheel Adapter, 5/6 bolt
Our Price: $139.95

Now available with both 5 and 6 Bolt patterns on a single adapter! Forged Aluminum Satin Wheel Adapter with a 2-1/2" total height, fits perfectly with Flaming River Tilt Columns and Steering Wheels. This adapter actually fits on the column shroud for a "seamless appearance."
Flaming River steering wheel adapter 3 bolt Bronco tilt column
Flaming River Steering Wheel Adapter, 3 bolt
Our Price: $149.95

This three Bolt Billet Aluminum Steering Wheel Adapter is designed to mount any traditional 3 bolt steering wheel to a Flaming River column for a smooth and seamless appearance. Flaming River Steering Wheel Adapters are machined from 6061 grade billet aluminum and are polished to a high luster. Width at Steering Wheel - 3"; Width at Column - 3.895"; Steering Wheel Bolt Size - 1/4"-28 UNC. (NOTE: Available in black powder coat for the same price. Please note in the comments section if you want the part in black.)