Telephone _ James Duff, Inc.

865.938.6696

M-F 10-6 EST

You are here: Home > Bumpers
Sort By:
Page of 3
Reproduction Chrome Bumper Ft or Rear 1966-77 Classic Early Ford Bronco
Reproduction Chrome Bumper, Ft or Rear, 1966-77 Bronco
Our Price: $164.95

Reproduction original style chrome bumper. Fits on front or rear of your 66-77 Ford Broncos.
For new hardware, we recommend our stainless steel bumper bolt kit, #4967.
Bolt Set W/Nuts for Chrome Bumper, 1966-77 Classic Early Ford Bronco OEM Stock
Bolt Set W/Nuts for Chrome Bumper, 1966-77 Bronco
Our Price: $12.95

Replace your old rusty bumper bolts with this new STAINLESS bolt set!

(NOTE: This set does not include the carriage bolt head bolts for the square punched holes in the middle of the bumper where the bumperettes mounted.)
Early Classic 1966-77 Ford Bronco Rear Plate Bumper
Early Bronco Rear Plate Bumper, No Pivots
Our Price: $435.00

Our plate bumper was designed with form and function in mind. Constructed of a combination of 3/16” and 1/4” plate for maximum strength without too much weight in a design created to maximize ground clearance and departure angle. 1/4” plate wraps around, protecting the lower quarters. This version features the same 2” receiver hitch (with easily accessible pin) and laser cut jacking points as our carrier bumper but without the pivots for those who don't intend on running any carriers on the bumper.
All bumpers ship bare and must be final prepped and finished to your liking. This bumper can also be built as a "Smoothy". Call our office for details. We will contact you with shipping rates.
Pre-Runner Front Rear Low Profile Receiver Pre-Runner Tube Bumper, 1966-77 Classic Early Ford Bronco
Pre-Runner Receiver Bumper, 1966-77 Bronco
Our Price: $329.00

Our Rear Pre-Runner Bumper is constructed of 2" x .120 wall tubing, features a gusseted and reinforced 2" receiver and is quick and easy to install using your original frame bolts. Available in stock or body lifted version to help offset the gap left when adding a 1-2" body lift. If you have a body lift, please note it in the comments section when you order (1" or 2" body lift offset available). All bumpers ship bare and must be final prepped and finished to your liking. We will contact you with shipping rates.
Winch Plate Bumper 1966-77 Classic Ford Early Bronco
Winch Plate Bumper, 1966-77 Early Bronco
Our Price: $475.00

Our plate steel winch bumper is designed for up to a 9500 pound winch. Designed to maximize your approach angle yet with the lowest possible winch mount height for maximum air flow to the radiator. Constructed of a combination of 3/16” and 1/4” plate for maximum strength without too much weight. 1/4” plate wrap around protection for lower fenders was recently revised to be more angled and include "JD" laser etched detail. Laser cut openings for jacking points and attachment points for shackles or tow bar. Same model fits with or without body lift.

Now also available with optional center hoop and/or kicker bars. The center hoop has two light tabs spaced for a pair of round lights or up to a 13" light bar. Please note that having us weld on the hoop adds about double to the cost of freight, depending on where you are located. As an alternative, we offer the DIY options, this will also allow anyone with one of our bumpers already to retrofit it.

All bumpers ship bare and must be final prepped and finished to your liking. (Sorry, pink sparkle powder coat is not available ;-)) We will contact you with shipping rates.
Gas Can Rack Carrier Duff Bumpers 1966-77 Early Classic EB Bronco BII Bronco II Ford
Gas Can Carrier for Duff Carrier Bumpers
Our Price: $299.95

Add the optional, driver’s side mounted, 5 gallon can carrier to your Duff Carrier Bumper. Made with the same stout material and features as our tire carrier bumper. Fits most plastic and metal 5 gallon “Gerry” cans. Can is removable through the back or front. (Not through cooler carrier like some.) Includes Hinge and Cam Latch with Brass Oilite Bushings. Cooler rack option available at additional charge (#4982B). (NOTE: Cooler rack cannot be added to Bronco II bumper due to angle of lift gate.)
Ft. Prerunner Bumper 1983-88 Bronco II & Ford Ranger Tube Pre-Runner
Ft. Prerunner Bumper 1983-88 Bronco II & Ranger
Our Price: $429.95

The basic first generation prerunner bumper is virtually unchanged from our previous design as it is still made from 2” and 1.5” diameter .120 (1/8”) wall steel tubing with dual light tabs on the front center hoop, tabs to mount license plate and reinforcements to strengthen the stock frame. The sides of the bumper now feature a larger end cap on the tubes. All bumpers ship bare and must be final prepped and finished to your liking.

We will contact you with shipping rates.
Ft Pre-runner Bumper 1989-90 Bronco II B2 BII 1989-92 Ford Ranger & 91-94 Explorer RBV Pre Runner Tube
Ft Pre-runner Bumper 1989-90 BII, 89-92 Ranger & 91-94 Explorer
Our Price: $399.95

Virtually unchanged from our previous design as it is still made from 2” and 1.5” diameter .120 (1/8”) wall steel tubing with dual light tabs on the front center hoop, tabs to mount license plate and reinforcements to strengthen the stock frame. The sides of the bumper now feature a larger end cap on the tubes. Includes our Dufflector Ends to be either bolted or welded on with included bolts (not attached to keep shipping costs down). This gives the bumper a finished look and hides the unsightly body lines left behind when the factory plastic is removed. All bumpers ship bare and must be final prepped and finished to your liking. We will contact you with shipping rates.
Pre-runner Winch Bumper 1983-88 Bronco II & Ford Ranger B2 BII Tube Prerunner Pre Runner
Pre-runner Winch Bumper 1983-88 Bronco II & Ranger
Our Price: $729.95

The first generation front Pre-Runner winch bumper is virtually unchanged from our previous design. Great care was taken to maximize approach angles and body protection while minimizing airflow blockage. Made from 2” and 1.5” diameter .120 (1/8”) wall steel tubing with dual light tabs on the front center hoop. Angled license plate mounting under the winch plate designed to handle up to a 9500# winch. Includes reinforcements to strengthen the stock frame. The sides of the bumper now feature a larger end cap on the tubes.
All bumpers ship bare and must be final prepped and finished to your liking. We will contact you with shipping rates.
Front Pre-Runner Winch Bumper, 1989-90 Ford BII Bronco II B2, 1989-92 Ranger, 1991-94 Explorer Tube Pre Runner
Front Pre-Runner Winch Bumper, 1989-90 BII, 89-92 Ranger, 91-94 Explorer
Our Price: $669.95

Like our previous design, great care was taken to maximize approach angles and body protection while minimizing airflow blockage. Made from 2” and 1.5” diameter .120 (1/8”) wall steel tubing with dual light tabs on the front center hoop. Angled license plate mounting under the winch plate designed to handle up to a 9500# winch. Includes reinforcements to strengthen the stock frame. The sides of the bumper now feature a larger end cap on the tubes. Includes our Dufflector Ends to be either welded or bolted on (with included bolts, not attached to keep shipping costs down). This gives the bumper a finished look and hides the unsightly body lines left behind when the factory plastic is removed.
All bumpers ship bare and must be final prepped and finished to your liking. We will contact you with shipping rates.