Telephone _ James Duff, Inc.

865.938.6696

M-F 10-6 EST

You are here: Home > Accessories Exterior
Choose a sub category:
Quik-Latch Trail Doors
Sort By:
Page of 1
Early Bronco Rolled Filler Panels
Front & Rear Roll Pans for Body lift Gap

Done a body lift and hate that gap left between your bumpers and the grill or rear quarters? These 18 gauge filler panels fill the space with a clean edge giving a finished look. Front rolled comes in three different versions to fit 1, 2 or 3" body lift. Rear pan features cut out for license plate wiring and comes in two versions; one for 1" body lift, the other for 2-3" body lifts (with laser etched trim marks to trim for which one you have.) Rear mounts through the stock bolt holes in the frame. The front mounts to the grill with the attachment of your choice (hardware not included due to variety of personal preferences, including welding.)

Note: Due to variances in body lift manufacturers, please check the minimum clearance for REAR pans. Measurement from top of frame horn to bottom of tailgate necessary: for 1" body lift, 1 7/8", for 2" 2 7/8"
more info
Early Bronco Wide Fender Flares
4" Wide Profile Smooth Fiberglass Flares
Our Price: $399.95
Sale Price: $359.95
You save $40.00!

James himself originally designed these 4" wide profile flares back in 1996-- different than anything else out there with a smooth outer finish with no visible mounting hardware! We worked with several manufacturers creating several variations over the years but the demand didn't justify the headaches as the design was just ahead their time. Over the years collectors have sought them out and more and more people begged us to bring them back, so here they are, improved with the attachment rail integrated into the flare for easier installation. Great for covering wide meats, full width axles or paddle tires. Will not fit with gas doors or larger aftermarket gas caps. Set of 4. Hardware and welting not included because of various preferences for installation. White Fiberglass gel coat for easy painting. Stay tuned for the flexible urethane version, due in the next month or so.
more info
Dana 44 Skid Plate & 9" Skid Plate
Dana 44 Skid Plate & 9" Skid Plate Combo
List Price: $178.50
Our Price: $169.00
Sale Price: $149.00
You save $29.50!

Dana 44 Diff Guard is a full wrap design of 1/2" Laser cut steel and 5/8" solid bar. Designed specially to clear EB track bar and tie rod. Center section wraps slightly under to protect case and prevent hang ups. Easy to install, doesn't require removing the cover. Silver zinc plated, includes hardware.

Ford 9" Skid Plate will protect your diff and the pinion from rocks with our unique 1/4" thick plate steel skid plate with maximum ground clearance. Easy to install two piece design; mounting bracket mounts to the housing studs, then skid plate mounts to it (along with pinion carrier bolts) with counter sunk bolts for a smooth sliding surface. Silver zinc plated, includes hardware.

This pricing is for both together.



Want to know what's involved for installation? Download instructions here
more info
9" Skid Plate, 1966-77 Classic Early Ford Bronco Jeep
9" Skid Plate, 1966-77 Bronco
Our Price: $109.50
Sale Price: $89.95
You save $19.55!

Protect your diff and the pinion from rocks with our 1/4" thick plate steel skid plate. We designed it for maximum ground clearance and heavy duty protection. Easy to install two piece design; mounting bracket mounts to the housing studs, then skid plate mounts to it (along with pinion carrier bolts) with counter sunk bolts for a smooth sliding surface. All bolt on installation requires no welding or dropping of the center section. Silver zinc plated for rust resistance, includes hardware and instructions.



Want to know what's involved for installation? Download instructions here
more info
Trail Sac Storage Bag Trash Bag
Duff Tuff Trail Sac Mesh Storage Bag
Our Price: $40.00

Celebrate Duff's 50th anniversary with our new Fifty Bucking Years logo Trail Sac! The super durable vinyl-coated polyester mesh bag with a gussetted bottom is great for those of us who pick up trash on the trails but don't want it leaking in the rig. Or to carry your sandy beach items or muddy trail gear such as tow straps & other recovery items. Includes two ball bungees for attaching to a multitude of spots or add the optional 48" carabiner bungee to attach it around your spare. Easy to clean with the hose, it is even the perfect size to clip in the floor mat holders at the car wash. Comes in black, blue, red, orange, yellow and pink. The material is mildew and fade resistant and is strong enough to resist rips and tears from branches on the trail and flying debris on the road. Made in the USA with 5 year Manufacturer Limited Warranty.

TrailSac is a great solution for Jeepers looking for exterior mounted storage space. Perfect for trash, trail gear or anything that you may want to keep with you but not inside your Jeep. This super durable and easy to clean mesh bag comes in all of SPIDERWEBSHADE signature colors. In addition, its a great way to add another piece of functional flare to your rig!

Note : Shown with optional SpiderWebShade TrailSacCord 48″ carabiner bungee (available for purchase separately).

- See more at: https://www.spiderwebshade.com/jeep-products/accessories/trailsac/#sthash.pGO3sSBv.dpuf

railSac is a great solution for Jeepers looking for exterior mounted storage space. Perfect for trash, trail gear or anything that you may want to keep with you but not inside your Jeep. This super durable and easy to clean mesh bag comes in all of SPIDERWEBSHADE signature colors. In addition, its a great way to add another piece of functional flare to your rig!

Note : Shown with optional SpiderWebShade TrailSacCord 48″ carabiner bungee (available for purchase separately).

- See more at: https://www.spiderwebshade.com/jeep-products/accessories/trailsac/#sthash.pGO3sSBv.dpuf

railSac is a great solution for Jeepers looking for exterior mounted storage space. Perfect for trash, trail gear or anything that you may want to keep with you but not inside your Jeep. This super durable and easy to clean mesh bag comes in all of SPIDERWEBSHADE signature colors. In addition, its a great way to add another piece of functional flare to your rig!

Note : Shown with optional SpiderWebShade TrailSacCord 48″ carabiner bungee (available for purchase separately).

- See more at: https://www.spiderwebshade.com/jeep-products/accessories/trailsac/#sthash.pGO3sSBv.dpuf

railSac is a great solution for Jeepers looking for exterior mounted storage space. Perfect for trash, trail gear or anything that you may want to keep with you but not inside your Jeep. This super durable and easy to clean mesh bag comes in all of SPIDERWEBSHADE signature colors. In addition, its a great way to add another piece of functional flare to your rig!

Note : Shown with optional SpiderWebShade TrailSacCord 48″ carabiner bungee (available for purchase separately).

- See more at: https://www.spiderwebshade.com/jeep-products/accessories/trailsac/#sthash.pGO3sSBv.dpuf
more info
license plate light bolts
License Plate Bolts
Our Price: $34.50

When replacing a factory bumper with aftermarket or running a gas can carrier bumper, the factory license plate bracket and lights are blocked.  These bolts both hold the plate on and illuminate it, keeping you legal. more info
Ford Bronco Hood Scoop
Hood Bubble, 1966-77 Ford Bronco
Our Price: $99.95

Our original design is back! Paintable and sandable white gelcoat. Attaches to stock hoods for 4" of extra clearance for use with aftermarket manifolds, carburetors or air cleaners. 29" deep, 22" wide, 4" high. Comes with black welting and rivets for installation. Fits 1966-77. Ships at 45# rate due to the dimensions of the protective packaging.



more info
Removable Door Hinges, Set of four, 1966-77 Early Classic Ford Bronco Replacement
Removable Door Hinges, Set of four, 1966-77 Bronco
List Price: $225.00
Our Price: $199.95
You save $25.05!

These are perfect for those of you who love to go door-less during the summer or while wheeling. Our hinges make it easy to simply remove your doors if they are in imminent danger. Our beefy cast steel hinges have heavy duty 1/2” pins with replaceable permanently lubricated bronze oilite bushings for smooth operation (vs. stock 1/4"). Our design reverses the side the pin stays on, the pin goes with the door—no hook to get caught on when the door is off. Combine with our Trail Doors and you’ve got doors for all seasons. Set of four black powder coated hinges includes new bolts and washers. Note: We are not kidding around when we say these are beefy, a set weighs nearly 15 pounds!

Check out our Tube Doors and Tube Door Skins as well!

Flat Rate Priority Mail shipping of $15 when shipped alone.
more info
Reproduction Chrome Bumper Ft or Rear 1966-77 Classic Early Ford Bronco
Reproduction Chrome Bumper, Ft or Rear, 1966-77 Bronco
Our Price: $164.95

We offer the best quality reproduction original style chrome bumper that we've found of the many on the market. Fits on front or rear of your 66-77 Ford Broncos.
For new hardware, we recommend our stainless steel bumper bolt kit, #4967.
more info
Dana 44 Diff Guard, 1971-77 Early Ford Classic Bronco Jeep Suzuki Ranger Explorer
Dana 44 Diff Guard, 1971-79 Bronco
Our Price: $69.00
Sale Price: $55.00
You save $14.00!

Full wrap design of 1/4" laser cut ring, 1/2" formed flat bar and 5/8" solid bar. Designed specially to clear EB track bar and tie rod. Center section wraps slightly under to protect case and prevent hang ups. Easy to install, doesn't require removing the cover. Silver zinc plated for rust resistance, includes hardware. Fits standard and high pinion Dana 44.


more info
Early Classic Bronco Trail Tube Doors with Removable Door Hinges 1966-77 Ford
Tube Trail Doors for Duff Removable Hinges, 1966-77 Bronco**
Our Price: $399.95

These trail tube doors are the result of too many long hot trail rides! They are perfect for those who want the cooling comfort and trail visibility of going doorless, but want a more secure feeling. They utilize our removable hinges and a cam latch that secures to your stock striker— so you can switch back and forth with your hard doors easily! Suzanne specifically requested the perfect armrest height, corner plate and close lower bar to keep your valuables from sliding out while on the trail. Made of .120 wall tubing for strength without being too heavy. Fabricated hinge has been recently changed to machined billet steel hinge. The 1/2” hinge pin on the door slides into a brass oilite bushing on the hinge on the door post. A rubber bumper holds the latch tight to the stock striker and polyurethane washers make for smooth operation of the handle. **Note: Recently revised to now fit 66-67 strikers as well.

Use of Duff Heavy Duty Removable Door Hinges #4235 is necessary for installation. Come bare so you can paint to match your rig. We have clamp on mirrors and slide on metal covers available to go with these.

See #7007 for our new doors that work with polished Stainless Steel Removable Hinges.

more info
1/4" Rocker Panel Guard Protection Guards with Slider Step, 1966-77 Classic Early Ford Bronco Rock trail armor guard rockski rails skis ski nerf bar sliders bars
1/8" Rocker Guards, 1966-77 Bronco
Our Price: $199.00

For serious rocker protection or just great looks, our smooth steel Rocker Guards are what you need. Two-piece design sandwiches the lower rocker panel lip between the 1/8” Laser cut outer plate and a 3/16” rear backing plate for extra protection and strength. Guards are 48” long to cover from flare to flare and is easily trimmed for varying wheel well openings. Makes a smooth sliding surface to prevent damage or to cover up the existing rock rash. Mounts with 3/8” Stainless Steel Button Head fasteners for rust-free good looks. Come bare so they can be painted to match or contrast your rig. Note: Ships in one box but due to the length, UPS recently started assessing a $10.50 added handling fee on boxes over 48".

Want to know what's involved for installation? Download instructions here
more info
1/8" Rocker Guards with Slider Step 1966-77 Bronco
1/8" Rocker Guards with Slider Ski Step, 1966-77 Bronco
List Price: $440.00
Our Price: $349.95
You save $90.05!

Back by popular demand! We haven't had the 1/8" version of our rockers with steps for quite a few years but people kept asking, so we've brought them back!

Same two-piece design as our standard 1/8" rocker guards but with a 39” x 1 1/2” x 3/16” wall tubing protector that is great for keeping rocks and trees away from the door and flares and can be utilized as a step.

Our design sandwiches the lower rocker panel lip between the 1/8” outer plate and a 3/16” rear backing plate (with nuts already attached) for extra protection. Guard is 48” long to cover from flare to flare and is easily trimmed for varying wheel well openings. These offer great protection for the sheet metal or to cover up the existing damage. Mounts with included 3/8” Stainless Steel fasteners for rust-free good looks. Come bare so they can be customized to match your rig. Note: If used for a step, we recommend application of non-skid tape.

Looking for something beefier? Check out our 1/4" version here.

Due to length, these are charged a $10.50 added handling fee by UPS. These are shipped in two boxes.

Want to know what's involved for installation? Download instructions here
more info
1/4" Rocker Guards with Slider Ski Skid Protector Step Nerf Bar 1966-77 Classic Early Ford Bronco
1/4" Rocker Guards with Slider, 1966-77 Bronco
List Price: $540.00
Our Price: $399.95
You save $140.05!

Two-piece design sandwiches the lower rocker panel lip between the 1/4” outer plate and a 3/16” rear backing plate for extra protection. Guard is 48” long to cover from flare to flare and is easily trimmed for varying wheel well openings. They offer great protection for the sheet metal or to cover up the existing damage. These also have a 39” x 1 1/2” x 3/16” wall tubing protector that is great for keeping rocks and trees away from the door and flares.

Mounts with 3/8” Stainless Steel Button cap bolts and nutserts for rust-free good looks. Come bare but easily paintable to match your rig. If you're planning on using these as steps, we recommend putting non-skid tape on them as shown on Hi Ho Silver, Suzy has been using these as steps on her Bronco for nearly 10 years! Please note: Due to their length, UPS recently started assessing a $10.50 added handling fee per box and these ship in 2 boxes.

Consider adding the quarter guards as featured on the yellow bronco in the photo. More information here.

Want to know what's involved for installation? Download instructions here
more info
Trail Tube Door Covers, 1966-77 Vintage Classic Early Ford Bronco Roadster
Tube Trail Door Covers, 1966-77 Bronco
Our Price: $99.95

Our newest addition to the Trail Door family. These sheet metal skins have a rolled upper edge so you don't have any sharp edges on your arms, they hang over the upper tube. Do not include mounting hardware, they will require your own hardware depending on how you choose to attach them. For Hi Ho Loco we trimmed the corner and used speed (Dzeus) fasteners with tabs welded onto the tubes. For Monster Garage Bronco, Michael welded studs onto the back of them and tabs on the tubes, they attach with nyloc nuts. Some people have permanently attached them or used them as a base for a fabric or vinyl cover to match their paint or soft tops as shown in the other photo. Come as a pair, bare so you can finish to your own preference. more info
Hood Struts Shocks 1984-90 Bronco II 1983-2011 Ranger 1991-2002 Explorer
Hood Struts, 84-90 Bronco II, 83-2011 Ranger, 91-2002 Explorer
Our Price: $119.95

This simple add-on is one you’ll wonder how you ever did without. Once the hood is lifted just a few inches, these gas charged hood struts smoothly lift the hood the rest of the way. Great for the vertically challenged—no more struggling to get the hood up high enough to get that #*%* prop rod in! Includes detailed instructions brackets, struts and hardware. Recently redesigned to fit more applications including: 84-90 Bronco II, 83-2011 Ranger, 91-2002 Explorer For metal hoods only.

Flat Rate $20 Shipping will calculate as an option if nothing else is in your shopping cart.
more info
1 1/2" 1.5" clamp on side mirror rollbar roll bar roll cage bronco jeep 3" convex
1 1/2" Clamp On 3" Side Mirror
Our Price: $52.95

Perfect for those of you who have door inserts, run door less or with our new Trail Doors. 3" Convex mirror is attached to a 1 1/2" clamp to fit either on the upper tube of the Trail doors or to your roll cage. more info
1 1/2" 1.5" clamp on side mirror rollbar 3" convex jeep landcruiser ford bronco 4x4 off road roll cage
1 1/2" Clamp On Extended 3" Side Mirror
Our Price: $64.95

Perfect for those of you who have door inserts, run doorless or have our new Trail Doors.  3” Convex mirror attaches to a 1 1/2” clamp with a 3” extension to fit either on the upper tube of the Trail doors or to your roll cage. more info
14" Wide Angle Rearview Mirror 2" Rollbar Clamps Bronco Ford Jeep Suzuki Landcruiser Ranger 4x4 offroad Rear View
14" Wide Angle Rearview Mirror with 2" Rollbar Clamps
Our Price: $79.95

14" wide angle mirror attaches to two black anodized 2" billet clamps to mount to your roll cage. Gets the mirror off the glass (giving you a little better head room and view) and gives you a wide angle view as a bonus! more info
Bilt Cool Ventilated Stainless Inner Fender Panel Set 1966-77 Classic Early Ford Bronco Cooling Overheating
Bilt Cool Ventilated Stainless Inner Fender Panel Set, 1966-77 Bronco
Our Price: $139.95

16 gauge brushed Stainless Bilt Cool panels replace the vertical center section of your inner fenders--letting the hot air escape from around the headers or manifolds.  Some people completely remove the inners but using these leaves the original structure intact for front clip strength. Gives a nice finished look to your wells and provides a bit of a barrier against debris. Lowers engine temperature approximately 10°. more info
Ford Bronco II Skid Plate
Duff Tuff Skid Plate, Ford Bronco II, 83-92 Ranger, 91-94 Explorer
Our Price: $159.95

Back by popular demand! Our 1/8" aluminum Duff Tuff Skid Plate gives a finished look to your front end while adding extra protection for your radiator. Backed with a steel frame for strength, it's an easy install, bolting to the frame sway bar mounts and the front crossmember.  Shown on our '84 Bronco II with Plate Winch Bumper. When fitting to the Explorer chassis, locating and drilling of new holes in vehicle frame or skid plate may be required. Winch, roller fairlead, light bracket, and KC Hilites Slim Lights, if desired, must be purchased from other vendors. more info
Early Bronco Plate Bumper with Tire & Jack Carrier Rack
Early Bronco Plate Bumper with Tire & Jack Carrier
List Price: $1,200.00
Our Price: $949.95
You save $250.05!

Our plate bumper was designed with form and function in mind. Constructed of a combination of 3/16” and 1/4” plate for maximum strength without too much weight in a design created to maximize ground clearance and departure angle. 1/4” plate wraps around, protecting the lower quarters. A 2” receiver hitch (with easily accessible pin) and laser cut jacking points can be combined with our proven camlatch tire, can carrier and cooler racks. Includes Jack/Tire Carrier and pivots on both sides for easy can carrier addition. Can carrier recently redesigned for a cleaner look. Laser cut JD logo in plate steel replaces the previous strap design. Includes oil light bushings for smooth operating long lasting function and our exclusive easy to use cam latch design. Ships raw. We will contact you for shipping on this item. more info
Locking Billet Aluminum Gas Fuel Caps, 1966-77 Early Ford Classic Bronco
FREE SHIPPING- Locking Billet Gas Cap, 1966-76 Bronco
Our Price: $69.95

Billet aluminum gas caps are available for 1966-70 or 1971-76 Bronco with either a black or clear anodized finish for an incredible appearance! Features include large knurled edges and an anti-theft locking mechanism with two keys to protect your fuel. Provides the necessary vented seal required for emissions and are an excellent upgrade for worn stock caps. Sold each.


more info
Pre-Runner Bumper Tire Carrier Early Classic Ford Bronco
Tube Bumper with Tire Carrier, 1966-77 Bronco
List Price: $1,175.00
Our Price: $899.95
You save $275.05!

Interior space is a precious commodity in a Bronco and trail gear takes up a lot of space! With the addition of one of these babies to the back of your rig, you’ll be traveling in comfort! We offer different configurations based on your needs, add more when you want! Start with the Tire Carrier Bumper, add the gas can and cooler carriers later.

Based on our proven 2” receiver hitch bumper, the tire carrier handles up to a 38” tire! Built-in mount on the carrier has a positioning pad and a T-handle retention system for securely mounting a 48” or 60” Hi-Lift Jack. Tire mounts on wheel studs and is secured with included lug nuts or you can add locking lug nuts for security. Access to the jack and tailgate is quick and easy thanks to our own Cam-latch design. The handle is simple to operate and tucks up out of the way of trail obstacles. A built in drop pin automatically holds the carrier open for easy tailgate access. The bumper end pivots feature oil impregnated bushings for long lasting smooth operation. Specially designed pivots maximize departure angle by not hanging lower than the main lower tube. Made from 1 1/2” x .120 wall tubing with both 3/16” and 1/4” plate for strength. Bumper is also equipped with a driver side pivot for easy addition of the gas can carrier. Available in stock or to accommodate for a 2" body lift. Ships bare. We will contact you with shipping rates.
more info
Mega Mini LED LUX Light Installation Kit
FREE SHIPPING- LED LUX Light Install Kit
Our Price: $79.95

FREE US Shipping!

This high quality very clean universal Installation Kit can be used with our LED Accent Lights or LED Rock Lights. Installing lights could not be easier. Just connect the battery leads to your battery, install the switch…. you have fused and switched power leads... then use the included band crimps and adhesive lined shrink tube to attach the leads of the lights to the switched leads of the wire harness and you have a true OEM quality installation.

Includes:
•Heavy duty 18 AWG stranded and tinned copper wire with corrugated sheathing and adhesive lined shrink tube ends to keep everything neat and durable.
•Premium LED back-lit LUX logo rocker switch with dust/ dirt baffle for added protection
•Heavy duty Junction Box with screw terminals and built in fuse
•Battery leads
•Switched leads
•Accessory pack including an assortment of adhesive lined shrink tube, zip tie mounts, zip ties and band crimps.

Can be used to install up to 12 Mega Mini Lights.
more info
LED Light Rock Accent lighting
FREE SHIPPING- LUX LED Rock Lights, Set of 4
Our Price: $99.95

FREE US Shipping!
Limited to stock on hand.


The most amazing off-road LED’s we’ve found and they’re Made in the USA! Each light packs a punch of bright and broad light in a tiny AA battery sized magnetic waterproof resin sealed unit. With their compact size, durability and ease of installation, they can be used for rock lights or accent lights, the possibilities are endless...

High powered rubber backed magnets make installation a breeze. No drilling, screwing, taping, or gluing required. You can adjust the placement at any time as long as you leave enough slack in the wires. The magnet strength far exceeds what is required to hold the lights securely even in high impact/jarring or bouncing. Also, if one gets a direct hit, it can just pop off rather than getting destroyed!

Very high quality and extremely durable lights, leads are a 20 gauge wire with double insulation the full length of the lead and triple where the lead enters the light. Includes a 3 year warranty against defects AND a 1 year/1 time accidental damage replacement- no one else offers this type of coverage.

The Monster Bronco (pictured) with 8 white/4 blue. Without a full body and it being narrowed, the sheet metal/mounting points are much farther inboard than the 40” tires, creating shadows. Most Broncos will be very happy with 4 white for rock lights and any additional or colors for accents. We'll get some full bodied rig pics up as soon as we can. 4 watts of light output, yet you can run up to 12 lights off of one 5 amp fuse! Includes 4 lights with 14’ leads, 8 zip-ties and instructions.
more info
Quik Latch Billet Aluminum Hood Pins
FREE SHIPPING- Quik Latch Billet Hood Pins, Pair
Our Price: $249.00

Free US Shipping!

Quik Latch has developed a new generation of hood fasteners that far surpass traditional hood pins in both style and functionality. They solve these problems with a sleek and simple yet elegant snap shut and quick release action. Quik Latch hood fasteners mount to the hood (you can use your existing pin holes), and line up with studs placed on the core support or other bracket. Once the hood is closed, Quik Latch automatically latch to the studs and will not release until the center button on the top of the mechanism is depressed. They will not rust, can be painted to match your paint and are Made in the USA. They’re even approved for use by the NHRA if that gives you any idea of the quality! Michael has these on the Monster Garage Bronco along with the Minis for the body panels.

Comparison:
7330/31: 700# static pull force per latch 2.5" OD
7332/7333: 500# static pull force per latch 1.75" OD
7335: 150# static pull force per latch 1.25" OD
more info
Quik Latch Billet Locking Hood Pins aluminum catch aero
FREE SHIPPING- Quik Latch Billet Locking Hood Pins, Pair
Our Price: $349.00

FREE US Shipping!

Tired of the traditional hood pins that rust? Have you lost your hood pins due to removing the lanyard in hopes of protecting the paint? Had a hood fly up due to forgetting to put them back in? We can say yes to all of those!

Quik Latch has developed a new generation of hood fasteners that far surpass traditional hood pins in both style and functionality. They solve these problems with a sleek and simple yet elegant snap shut and quick release action. Quik Latch hood fasteners mount to the hood (you can use your existing pin holes), and line up with studs placed on the core support or other bracket. Once the hood is closed, Quik Latch automatically latch to the studs and will not release until the center button on the top of the mechanism is depressed. They will not rust, can be painted to match your paint and are Made in the USA. They’re even approved for use by the NHRA if that gives you any idea of the quality! Michael has these on the Monster Garage Bronco along with the Minis for the body panels.

These feature a locking option so that you can keep the valuable parts underneath your hood secure. Push button release when unlocked. Once the lock is engaged, the button is locked into place and cannot be depressed to release the latch.

Comparison:
7330/31: 700# static pull force per latch 2.5" OD
7332/7333: 500# static pull force per latch 1.75" OD
7335: 150# static pull force per latch 1.25" OD


more info
Quik Latch Billet Aluminum Hood Pins
FREE SHIPPING- Quik Latch Billet Midi-Hood Pins, Pair
Our Price: $115.95

Free US Shipping!

The latest innovation from Quik Latch- they listened to requests and developed these pins, in between their large and minis for people with less load requirements. Perfect for fiberglass hoods! (Smaller diameter will not work on hoods that have already had the big style of old school pins.)

Quiklatch are a new generation of hood fasteners that far surpass traditional hood pins in both style and functionality. They solve these problems with a sleek and simple yet elegant snap shut and quick release action. They mount to the hood and line up with studs placed on the core support or other bracket. Once the hood is closed, Quik Latch automatically latch to the studs and will not release until the center button on the top of the mechanism is depressed. They will not rust, can be painted to match your paint and are Made in the USA. They’re even approved for use by the NHRA if that gives you any idea of the quality! We have the larger version of these on Hobby Horse and the Monster Garage Bronco along with the Minis for the body panels.

Comparison:
7330/31: 700# static pull force per latch 2.5" OD
7332/7333: 500# static pull force per latch 1.75" OD
7335: 150# static pull force per latch 1.25" OD


more info
Quik Latch Billet Mini Pin Fasteners
Quik Latch Billet Mini Pin Fasteners, each
Our Price: $24.00

Mini versions of Quik Latch's revolutionary hood pins. Roughly just a little larger in diameter than a quarter, they can be used for many uses. Michael has them as quick release connectors on the body panels of the Monster Garage Bronco. It is incredibly strong for its size as well, as it can withstand a pulling force of 150 pounds Made of T-6 aluminum and stainless to resist corrosion. Diameter of latch: 1.23” x 2.13”

Comparison:
7330/31: 700# static pull force per latch 2.5" OD
7332/7333: 500# static pull force per latch 1.75" OD
7335: 150# static pull force per latch 1.25" OD
more info
Quik Latch Billet Air Cleaner Keeper
Quik Latch Billet Air Cleaner Keeper
Our Price: $27.00

For decades, people have been securing the air cleaner to a carburetor with a wing nut. Spinning it on and off is slow and often results in dropping it! Replace it with a specially designed mini latch that is a perfect finishing touch to custom build. Requires modification to the air cleaner to fit the latch button. Will not work on stock carb without mod. Diameter of latch: 1.23” stud: 4.125”
more info
Stainless Steel Removable Door Hinge Hinges Kit Set 1966-77 Ford Classic Early Vintage Bronco
Free Shipping Stainless Removable Door Hinge Kit, 1966-77 Bronco
Our Price: $275.00
Sale Price: $249.95
You save $25.05!

FREE SHIPPING

We've offered our beefed up version of removable hinges now for years but have had quite a few requests for the stainless hinges. Removable hinges are perfect for those of you who love to go door-less during the summer or while wheeling, they make it easy to simply remove your doors if they are in danger.

These stainless steel hinges have standard 1/4” pins with replaceable brass oilite bushings for smooth operation. The pin goes with the door—no hook to get caught on when the door is off. Combine with our newest version of our Trail Doors and you’ve got doors for all seasons.

Kit includes four highly polished stainless hinges, two quick-release door check brackets, two door straps and stainless hardware.
more info
Stainless Steel Removable Door Hinge Hinges Trail Kit Set 1966-77 Ford Classic Early Vintage Bronco
Tube Trail Doors for Stainless Removable Door Hinges, 1966-77 Bronco
Our Price: $399.95

These doors are the result of too many long hot trail rides! They are perfect for those who want the cooling comfort and trail visibility of going doorless, but want a more secure feeling. We've been selling these for over 10 years. but we've recently created this version that utilize the readily available polished stainless removable hinges and a cam latch that secures to your stock striker— so you can switch back and forth with your hard doors easily!

Suzanne specifically requested the perfect armrest height, corner plate and close lower bar to keep your valuables from sliding out while on the trail. Made of .120 wall tubing for strength without being too heavy. A machined steel hinge pin is built into the door that slides into a brass oilite bushing on the hinge. Come bare so you can paint to match your rig. We have clamp on mirrors and slide on metal covers available to go with these. Use of Removable Door Hinges #4245 is necessary for installation.

We've offered our beefed up version of removable hinges now for years but have had quite a few requests for the stainless hinges. Removable hinges are perfect for those of you who love to go door-less during the summer or while wheeling, they make it easy to simply remove your doors if they are in danger.

Don't have the stainless hinge? We have them available as a savings when purchased together. The kit includes four highly polished stainless hinges, two quick-release door check brackets, two door straps and stainless hardware.
more info
Fullsize Bronco Rocker Guard Slider Step 1980-1996
Rock Sliders with optional Stowaway Steps, 1980-96 Fullsize Bronco
List Price: $890.00
Our Price: $739.95
You save $150.05!

Our new rock sliders for 1980-96 Fullsize are modular in design— start with the sliders, add the steps later or just for your passenger. Rock slider main tube features 2”x.125 wall. Steps plates feature dimple died holes for drainage and traction. Simply pull the pins, swivel them up above the frame and re-pin up above the frame rail for ground clearance while wheeling.

Bolt on installation to the frame rails and body with included hardware. Come bare. Will not currently work with body lifted or vehicles with Twin Traction Beam Long Arm setups due to conflict with frame mounts. Works with JD SAS long arms and stock.
more info
Duff Tuff American US Flag License Plate Tin Aluminum Tag
Duff Tuff American Flag License Plate
Our Price: $10.00

Proudly mark your rig with a cool flowing American flag aluminum license plate with a Duff Tuff logo! Aluminum tag with embossed stars and permanent baked on finish
6 x 12" Universal mounting slots.
more info
2" Receiver Trailer Hitch, 1966-77 Classic Early Ford Bronco
Receiver Hitch, 1966-77 Bronco
Our Price: $159.95

This 2" receiver is a Class II hitch, 3500 lb. capacity, 300 lb. tongue weight. Proven design we've been selling for over 20 years slips into the ends of the frame, mounts using original bolt holes, NO drilling required. Can be used front or rear. Fits 1966-77, 1976-77 require slight modification to the gas tank skid plate. Matte Black Powder Coated for longevity.

DOES NOT INCLUDE RECEIVER INSERT OR PIN. Note: Due to frame mount changes the #4905 will not work with our Pre-Runner bumpers.
more info
LED Light Rock Accent lighting
FREE SHIPPING- LUX LED MicroColor Rock Lights, Set of 4
Our Price: $59.95

FREE US Shipping!
Limited to stock on hand.

LED accent lights and they’re Made in the USA! Each light packs a punch of bright and broad light in a tiny AAA battery sized magnetic waterproof resin sealed unit. Compact, durable and easy to install with high powered magnets make installation a breeze. No drilling, screwing, taping, or gluing required. You can adjust the placement at any time as long as you leave enough slack in the wires. The magnet strength far exceeds what is required to hold the lights securely even in high impact/jarring or bouncing. Also, if one gets a direct hit, it can just pop off rather than getting destroyed!

High output universal LED accent lighting pods use an industry standard 5050 SMT LED, they are IP68 waterproof rated. These features, along with color choices, make these lights perfect for smaller accent lighting needs for motorcycles, ATV's and interior LED accent lighting for auto, marine, and RV's.

Very high quality and extremely durable lights, leads are a 20 gauge wire with double insulation the full length of the lead and triple where the lead enters the light. Includes a 3 year warranty against defects AND a 1 year/1 time accidental damage replacement- no one else offers this type of coverage.

4 watts of light output, yet you can run up to 12 lights off of one 5 amp fuse! Includes 4 lights with 8’ leads, 8 zip-ties and instructions.
more info
No-Drill LED Light Bar Windshield Mount, Early Bronco
No-Drill LED Light Bar Windshield Mount, Early Bronco
Our Price: $199.95

Thinking of installing a light bar on your Early Bronco but don’t want to drill into your windshield frame? This bracket makes for a quick and easy install without drilling or permanent modification. It fits between the windshield frame and hard top or soft top riser, so no worries about which top you can use, they all will work with our mount.

Designed to fit a 50” LED Bar (Mounting point to mounting point) If your light bar is not exact, there is some adjustment. If you must widen it, the mounts will over hang the window frame slightly and you’ll also need to seal the gap between the mounts with silicone to prevent leaks. Come black textured powder coat. Made in the USA.
#7230 Light Bar Windshield Bracket, 1966-77 Bronco

more info
Quik Latch Billet Aluminum Hood Pins
FREE SHIPPING- Quik Latch Locking Billet Midi-Hood Pins, Pair
Our Price: $210.95

Free US Shipping!

The latest innovation from Quik Latch- they listened to requests and developed these pins, in between their large and minis for people with less load requirements and more affordable too. Perfect for new fiberglass hoods! (Smaller diameter will not work on hoods that have already had the big style of old school pins.)

Quiklatch are a new generation of hood fasteners that far surpass traditional hood pins in both style and functionality. They solve these problems with a sleek and simple yet elegant snap shut and quick release action. They mount to the hood and line up with studs placed on the core support or other bracket. Once the hood is closed, Quik Latch automatically latch to the studs and will not release until the center button on the top of the mechanism is depressed. They will not rust, can be painted to match your paint and are Made in the USA. They’re even approved for use by the NHRA if that gives you any idea of the quality! We have the larger version of these on Hobby Horse and the Monster Garage Bronco along with the Minis for the body panels.

Comparison:
7330/31: 700# static pull force per latch 2.5" OD
7332/7333: 500# static pull force per latch 1.75" OD
7335: 150# static pull force per latch 1.25" OD


more info
Early Classic Bronco Trail Doors with Removable Door Hinges 1966-77 Ford
Tube Trail Doors with Duff Removable Hinges, 1966-77 Bronco**
Our Price: $549.95

These doors are the result of too many long hot trail rides! They are perfect for those who want the cooling comfort and trail visibility of going doorless, but want a more secure feeling. They utilize our removable hinges and a cam latch that secures to your stock striker— so you can switch back and forth with your hard doors easily! Suzanne specifically requested the perfect armrest height, corner plate and close lower bar to keep your valuables from sliding out while on the trail. Made of .120 wall tubing for strength without being too heavy. Fabricated hinge has been recently changed to machined billet steel hinge. The 1/2” hinge pin on the door slides into a brass oilite bushing on the hinge on the door post. A rubber bumper holds the latch tight to the stock striker and polyurethane washers make for smooth operation of the handle. **Note: Recently revised to now fit 66-67 strikers as well. Come bare so you can paint to match your rig.

Use of Duff Heavy Duty Removable Door Hinges #4235 is necessary for installation, included in this combo package. For doors alone (if you already have hinges) see #7005. See #7007 for our doors that work with polished Stainless Steel Removable Hinges.

We have clamp on mirrors and slide on metal covers available to go with these. Find them here


more info
Stainless Steel Removable Door Hinge Hinges Trail Kit Set 1966-77 Ford Classic Early Vintage Bronco
Tube Doors with Stainless Removable Door Hinges, 1966-77 Bronco
Our Price: $599.95

These doors are the result of too many long hot trail rides! They are perfect for those who want the cooling comfort and trail visibility of going doorless, but want a more secure feeling. We've been selling these for over 10 years. but we've recently created this version that utilize the readily available polished stainless removable hinges and a cam latch that secures to your stock striker— so you can switch back and forth with your hard doors easily!

Suzanne specifically requested the perfect armrest height, corner plate and close lower bar to keep your valuables from sliding out while on the trail. Made of .120 wall tubing for strength without being too heavy. A machined steel hinge pin is built into the door that slides into a brass oilite bushing on the hinge. Come bare so you can paint to match your rig. We have clamp on mirrors and slide on metal covers available to go with these. Use of Removable Door Hinges #4245 is necessary for installation and included in this package price. Doors also available on their own, see #7007

Removable hinges are perfect for those of you who love to go door-less during the summer or while wheeling, they make it easy to simply remove your doors if they are in danger.

The kit includes four highly polished stainless hinges, two quick-release door check brackets, two door straps and stainless hardware.
more info
Hood Struts Shocks Reinforcement 1966-77 Classic Early Ford Bronco
Hood Struts, Metal and Fiberglass Hoods, 1966-77 Bronco
Our Price: $119.95

This simple add-on is one you’ll wonder how you ever did without. Once the hood is lifted just a few inches, these gas charged hood struts smoothly lift the hood the rest of the way. Great for the vertically challenged—no more struggling to get the hood up high enough to get that #*%* prop rod in! Another added benefit— they keep the hood from flying all the way up in wind storms (or if your don't get it latched) and cracking your hood scoop or breaking your windshield! See those little cracks down the sides of your hood? Our design is better than others on the market because it includes long support brackets that mount on both hood braces that add reinforcement while providing a place for the struts to mount. Includes brackets, struts and hardware.

Now two versions available, the original for metal hoods and now an application that includes lighter pressure struts for use on fiberglass hoods.

Want to know what's involved for installation? Download instructions here


Flat Rate $20 Shipping will calculate as an option if nothing else is in your shopping cart.
more info