Telephone _ James Duff, Inc.

865.938.6696

M-F 10-6 EST


  Home > Full Size 1980-1996 >

Fullsize Bronco Solid Axle Swap Heim Joint Steering System
Fullsize Ford 1980-96 Bronco Solid Axle Swap SAS Heim Joint Steering System Linkage Nugent Zebra Stacey David Gearz stone crusher


 
Alternative Views:


Our Price: $399.95
Sale Price: $364.95
You save $35.00!


Product Code: 5645


Heim Steer Add Ons:
Drill Kit 5640-DK [Add $19.95]
Measure Kit - 5640M [Add $14.95]

 
Description
 
When doing a Solid axle Swap on your Fullsize Bronco, you'll need new steering linkage. Our tough new steering systems use 1.25 DOM with a .2815 wall thickness threaded (no weld in insert) for maximum strength and clearance. We attach the drag link to the tie rod via a saddle to maintain factory geometry and to eliminate the use of long spacers and additional torque on the passenger side knuckle. We use misalignment spacers around the high quality Teflon lined 3/4 rod ends and GR8 bolts to prevent binding and allow full articulation of the joint. Requires drilling out your knuckles and pitman arm to 3/4 (except with our new Dana 44 swap knuckles that are machined 3/4). Can be installed over or under the knuckle with included hardware. We include all metal lock nuts and cotter pins to drill and secure everything in place. Comes black powder coated with detailed instructions. To get you the correct one we need two measurements on your vehicle; from center to center of your knuckles where the tie rod goes through and from the center of the pitman arm to the center of the PASSENGER side knuckle. These kits are based on a stock location steering box. We want both of these measurements because they will vary depending on lift height, steering box and the front end/knuckle setup you have. Also note that there is a significant amount of adjustment with 2 joints on each linkage. Check your local regulations before ordering as some states will not pass inspection with heim joints in the steering system. Please note that these systems are not compatible with a shock mounted to the front of the C-Cap. Shocks must be behind the coil. Call for pricing on custom setups.



Want to know what's involved for installation? Download instructions here
Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.


  0 of 0 people found the following review helpful:
 
5 of 5 Heim joint steering March 17, 2019
Reviewer: Eric Brady from Brooksville , FL United States  
This kit is definitely one of the best on the market. It's comparison over the stock parts are far superior. Definitely a great purchase!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Heim joint steering April 14, 2016
Reviewer: Michael Payne from Mineral Wells , TX United States  
Just got my steering. Have not installed yet. Still ordering parts for my rebuild. Fast service. Will be ordering more parts from you guys real soon.

Was this review helpful to you?


Browse for more products in the same category as this item:

Full Size 1980-1996
Full Size 1980-1996 > Solid Axle Swap
Steering
Stonecrusher Steering