Telephone _ James Duff, Inc.

865.938.6696

M-F 10-6 EST

You are here: Home > Lokar
Lokar
Sort By:
Page of 4
Lokar Billet Bronco Pedals
FREE SHIPPING- Early Bronco Lokar Billet Bronco Pedals

Free US Shipping!

We worked with our neighbors here in Knoxville, Lokar to create these high quality billet aluminum pedal pads Made in the USA. Not cheap Chinese made and looks like it stuff! Easy installation, all mount with stainless bolts or set screws (dimmer). Gas pedal comes with new spring and reuse the Bronco original bushing and pedal shaft. We even have a version to convert a small brake pedal to a large brake pedal without having to modify anything. These kits includes gas pedal with spring, brake pedal (style of your choice) and clutch pedal (if necessary). To complete the package the e-brake #7371 and dimmer #7373 are also available, but sold separately.


more info
Lokar Billet Bronco Pedals
FREE SHIPPING- Bronco Lokar Billet Black Anodized Bronco Pedals
Our Price: $15.00

Free US Shipping!

We worked with our neighbors here in Knoxville, Lokar to create these high quality billet aluminum pedal pads Made in the USA. Not cheap Chinese made and looks like it stuff! Easy installation, all mount with stainless bolts or set screws (dimmer). Gas pedal comes with new spring and reuse the Bronco original bushing and pedal shaft. We even have a version to convert a small brake pedal to a large brake pedal without having to modify anything. These kits includes gas pedal with spring, brake pedal (style of your choice) and clutch pedal (if necessary). To complete the package the e-brake #7371 and dimmer #7373 are also available, but sold separately. Black Anodized.


more info
Lokar Throttle/Kickdown Bracket for 86-93 Ford EFI Mustang EGR Stainless Black Midnight
Lokar Throttle/Kickdown Bracket for 86-93 Ford EFI Mustang EGR
Our Price: $18.95

Ford EFI Bracket fits 1986-93 Ford 302 and 351w fuel injection systems that have installed the Mustang EGR spacer.This stainless bracket mounts in the stock location for easy installation of the Lokar Kickdown Cables and Throttle Cables. This uses the #2342 Cable. Does not fit BAP throttle bodies. Available in Polished Stainless or Black Stainless.


more info
66-77 Lokar Billet Dimmer Bronco Pedal
FREE SHIPPING- Lokar Billet Dimmer Bronco Pedal
Our Price: $23.95

Free US Shipping!

Our brand spankin new billet aluminum dimmer pedal pad is high quality Made in the USA for us right here in Tennessee by Lokar. Not cheap Chinese made and looks like it stuff! Easy installation with a set screw. Match with our gas, brake and clutch #7375 and our e-brake #7371 for a complete look!


more info
66-77 Lokar Billet E-Brake Bronco Pedal
FREE SHIPPING- Lokar Billet E-Brake Bronco Pedal
Our Price: $25.95

Free US Shipping!
Our brand spankin new billet aluminum e-brake pedal pad is high quality, Made in the USA for us right here in Tennessee, by Lokar. Not cheap Chinese made and looks like it stuff! Easy installation, all mount with stainless bolts. Match with our gas, brake and clutch #7375 and our dimmer #7373 for a complete look!


more info
Lokar 4 Barrel Carburetor Bracket & Return Springs Throttle Cable stainless midnight black
Lokar 4 Barrel Carburetor Bracket & Return Springs for Throttle Cable
Our Price: $32.95

Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, and Demon 4 barrel carbs. Stainless bracket and dual stainless return springs are used to mount Lokar's Throttle Cable and Kickdown kits. Includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with an AOD transmission. Available in polished stainless or black stainless.


more info
Lokar Rectangular Shifter Boot & Stainless Steel Bezel
Lokar Stainless Bezel & Rectangular Shifter Boot
Our Price: $38.95

Set includes black vinyl boot, foam rubber seal to eliminate air flow from the floor through the boot, polished stainless ring and stainless screws. Outer dimensions 6.75" x 5.25" Inner dimensions 5.25" x 4".


more info
Lokar Aftermarket Steering Column Shifter Dress Up Kit Billet brushed anodized black midnight
Lokar Aftermarket Steering Column Dress Up Kit
Our Price: $39.95

For aftermarket Flaming River, Ididit and GM style tilt columns. * One-piece billet aluminum turn signal lever * Tilt steering lever * Emergency flasher knob * Fit steering columns with a single-screw design Available in Brushed, Polished or Midnight Series Black Anodized.


more info
Lokar Braided Stainless Throttle Cable Kit 94-95 EFI Satin Midnight Black Billet
Lokar Braided Stainless Throttle Cable Kit 94-95 EFI
Our Price: $47.95

All Lokar Hi-Tech Throttle Cables are available in either stainless steel braided housing or black stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. "U-Cut-to-Fit" outer housing is 24" in length with a "U-Cut-to-Fit" stainless inner wire. Custom lengths available upon request. These cables are Bronco friendly and attach directly to the stock Bronco throttle pedal assembly. Kits complete with installation instructions. Works on all carbs, 86-93 ford EFI and aftermarket fuel injection systems. Note will also need the #2341 bracket.


more info
Lokar Early Bronco Throttle Cable Assembly 4 Barrel Carb, 86-93 EFI Stainless Black Anodized Midnight Series
Lokar Early Bronco Throttle Cable Assembly 4 Barrel Carb, 86-93 EFI
Our Price: $49.95

All Lokar Hi-Tech Throttle Cables are available in either stainless steel braided housing or black stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. "U-Cut-to-Fit" outer housing is 24" in length with a "U-Cut-to-Fit" stainless inner wire. Custom lengths available upon request. These cables are Bronco friendly and attach directly to the stock Bronco throttle pedal assembly. Kits complete with installation instructions. works on all carbs, 86-93 ford EFI and aftermarket fuel injection systems. #2340 bracket is required for 4 barrel install and 4 barrel style fuel injection. Ford 86-93 EFI will require the #2341 bracket.


more info