865.938.6696

M-F 10-6 EST

You are here: Home > Mastercraft Safety
Sort By:
Page of 1
Mastercraft Seat Saver Removable Cover
Mastercraft Seat Saver Removable Cover, each
Our Price: $59.95

Protect your investment from the sudden down pour with no top, trail dog, or muddy jeans with seat saver seat covers. Allows you to sit in the seat when it is covered. Made from heavy duty Cordura material and Velcro latches the front and sides. Shown in red but only available in Black.
Mastercraft Seat Saver Removable Cover Bench Seat
Mastercraft 40" Bench Seat Saver Removable Cover
Our Price: $99.95

Protect your 40" Mastercraft bench seat from the sudden down pour with no top, trail dog, or muddy jeans with seat saver seat covers. Allows you to sit in the seat when it is covered. Made from Black heavy duty Cordura material, straps around the back with a buckle and Velcro latches the front and sides. Shown in blue but now only available in black.
Mastercraft Seat Bracket w/Slider, 1966-77 Bronco
Mastercraft Seat Mounting Bracket w/Slider, 1966-77 Bronco
Our Price: $183.95

We worked closely with Mastercraft to design and test these brackets. They allow the seat to sit lower than most aftermarket seats, giving you great visibility. No more looking through the wiper blades! Hardware allows you to preset the most comfortable amount of tilt to the seat, mount using stock seat mounting holes, slide using the underseat bar. Come powder coated black
Mastercraft Sportsman Suspension Seat Ford Classic Early Bronco Jeep Ranger
Mastercraft Sportsman Seat, each
Our Price: $289.95

The Mastercraft Sportsman is a low profile suspension seat with a fixed headrest, 5 point seat belt holes or loops to secure shoulder belts in place, and a mid-height (5.5”) side bolster for easy entry and exit, while still offering security. We run these high quality US Made seats in both Hi Ho Silver and Loco. The floor mounting area is 16” from front to back and 14” wide, seating height is approx. 3.5” from the floor. Require hard mounting with custom brackets or the seat mounting brackets with sliders #4739, sold separately. Seat Savers (removable covers) also sold separately.

Options available include:

•Schukra Adjustable Lumbar Support adjusts up to 3". Because it's mechanical, it will hold its form, unlike leaky air activated styles. Designate left or right for adjustment handles. Normally, we do left on driver and right on passenger so there is no interference with a center console.

•12V Seat Heaters are installed during seat assembly. Includes a complete harness long enough to run the switch to the dash or console (we wired them through the face of the Tuffy Console on Silver). High quality US Made units. Wonderful for winter wheeling, topless rigs with inadequate heat or those with low back problems.

•Seat Pocket. Add a pocket to the back of your seat to hold maps, bottles, hats, and more! Measures about 14" tall by 12.5" wide and features a rugged zipper closure.
Mastercraft Rubicon Suspension Racing Seat 1966-77 Classic Early Ford Bronco Ranger Jeep
Mastercraft Rubicon Seat
Our Price: $329.95

The Rubicon is a low profile suspension seat with a fixed headrest, 5 point seat belt holes or loops to secure shoulder belts in place, and a slightly more upright seating angle than Sportsman. (Overall front to back is only 25" ).  Containment height/side bolster (6.5") and overall height of 34"

The floor mounting area is 16” from front to back and 14” wide, seating height is approx. 3.5” from the floor. Require hard mounting with custom brackets or the seat mounting brackets with sliders #4739, sold separately. Seat Savers (removable covers) also sold separately.

Options available include:

•Three position adjustable headrest is integrated into the steel frame. Cannot be added later.

•Schukra Adjustable Lumbar Support adjusts up to 3". Because it's mechanical, it will hold its form, unlike leaky air activated styles. Designate left or right for adjustment handles. Normally, we do left on driver and right on passenger so there is no interference with a center console.

•12V Seat Heaters are installed during seat assembly. Includes a complete harness long enough to run the switch to the dash or console (we wired them through the face of the Tuffy Console on Silver) . Wonderful for winter wheeling, topless rigs with inadequate heat or those with low back problems.

•Seat Pocket. 8.5x11" rear seat pocket can hold maps, bottles, hats, etc. Features a flap with Velcro closure.
Mastercraft Baja RS Reclining Suspension Seat Bronco Ford Ranger Jeep
Mastercraft Baja RS Reclining Suspension Seat, each
Our Price: $499.95

The same high quality as their original suspension seats but with the added feature of a heavy duty 9 position recliner from tilt forward to full recline with a Billet Lever. Lower bolsters allow for up to a 40” waist in comfort while still providing support. Accommodates 5 point harnesses, anti-submarine slat and shoulder harness slats are standard, works best with most 3-point restraint systems. Shown in all black in Hobby Horse. Custom colors available for an additional charge, visit mastercraftseats.com to view different color options available for the standard price. Sold individually, specify right or left tilt mechanism. Require seat mounting brackets, sold separately. Ship UPS.

Options available include:

•Dirt Sports stitch pattern with vinyl inserts shoulder .

•Three position adjustable headrest is integrated into the steel frame. Cannot be added later.

•Schukra Adjustable Lumbar Support adjusts up to 3". Because it's mechanical, it will hold its form, unlike leaky air activated styles. Designate left or right for adjustment handles. Normally, we do left on driver and right on passenger so there is no interference with a center console.

•12V Seat Heaters are installed during seat assembly. Includes a complete harness long enough to run the switch to the dash or console (we wired them through the face of the Tuffy Console on Silver). High quality US Made units. Wonderful for winter wheeling, topless rigs with inadequate heat or those with low back problems.

•Seat Pocket. Add a pocket to the back of your seat to hold maps, bottles, hats, and more. Measures about 14" tall by 12.5" wide and features a rugged zipper closure.

Mastercraft 40" Bench Suspension Seat
Mastercraft 40" Bench Suspension Seat
Our Price: $574.95

The Mastercraft bench seat is made with same quality components as the front buckets but with room for two and it fits perfectly between the wheel-wells. Rear seats feature 4 point harness slot, harness loops, available with or without adjustable headrests. Seat is 40” wide and requires drilling three holes for installation. Colors available by special order.