Telephone _ James Duff, Inc.

865.938.6696

M-F 10-6 EST


  Home > 2 Big 1978-1979 >

Torque Tamer Long Travel Traction Bar 1978-96 Bronco

Long Travel Traction Bar Fullsize Big Ford Bronco Torque Tamer 1978 1980


 
Alternative Views:


Our Price: $329.95

Product Code: 5328


Specify Axle*:
8.8"
9"

 
Description
 
Rock crawling, low-geared axles and high torque motors, soft long travel leaf springs —any combination of these can cause leaf spring damage and blow u-joints. Ordinary long tube, fixed mount traction bars limit travel as the rear axle cycles up and down because the axle also needs to move back and forth. Our new traction bar has a “V” frame designed center link for strength and utilizes a specially designed shackle to eliminate axle wrap. The bar runs between the mufflers, paralleling the drive line; protecting it. It also maintains proper u-joint and CV angles under power. The main bar attaches to a high clearance cross-member and shackle. The cross-member mounts up between the frame rails for maximum clearance and helps protect your CV joint and output shaft from trail obstacles.

Welding brackets to the housing is required.
•1/8” plate gussets in double sheer
•Cross member for C-channel Broncos
•Axle brackets for either 8.8” or 9" axles
•Double Sheer Axle Brackets

(Please leave us a note in the "Comments" section and let us know which axle you are using in your build. What year? Which axle?)


Long Travel Traction Bar Torque Tamer Full-size Big Bronco
Average Customer Review: 5 of 5 Total Reviews: 2 Write a review.


  0 of 0 people found the following review helpful:
 
torque tamer for f150 4wd April 18, 2019
Reviewer: Anonymous Person from longmont, CO United States  
i received all parts good condition very promptly - fit looks to be good when i get the traction bars installed

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4BT Bronco Beast Install February 23, 2019
Reviewer: Rick Garrigan from SAHUARITA, AZ United States  
Got the long travel "Torque Tamer" installed and I am very pleased. Went together pretty easy and straight forward. I am using Deaver springs and they are great, but are very susceptible to axle wrap and when I am towing the Trailer Beast it is even worse. My first seconds driving the 4BTBB I could tell it was healed...lol. Very sturdy construction and HD hardware where needed.
Here is my YourTube install video...
https://www.youtube.com/watch?v=rc-SU53SY_4&feature=youtu.be

Was this review helpful to you?


Browse for more products in the same category as this item:

2 Big 1978-1979
2 Big 1978-1979 > Suspension
Full Size 1980-1996
Full Size 1980-1996 > Suspension
New Products