|
|
|
|
 |
Quik Latch Billet Mini Pin Fasteners, each
|
|

Mini versions of Quik Latch's revolutionary hood pins. Roughly just a little larger in diameter than a quarter, they can be used for many uses. Michael has them as quick release connectors on the body panels of the Monster Garage Bronco. It is incredibly strong for its size as well, as it can withstand a pulling force of 150 pounds Made of T-6 aluminum and stainless to resist corrosion. Diameter of latch: 1.23” x 2.13”
Comparison: 7330/31: 700# static pull force per latch 2.5" OD 7332/7333: 500# static pull force per latch 1.75" OD 7335: 150# static pull force per latch 1.25" OD
|
|
 |
|
|
|
|
 |
Quik Latch Billet Air Cleaner Keeper
|
|

For decades, people have been securing the air cleaner to a carburetor with a wing nut. Spinning it on and off is slow and often results in dropping it! Replace it with a specially designed mini latch that is a perfect finishing touch to custom build. Requires modification to the air cleaner to fit the latch button. Will not work on stock carb without mod. Diameter of latch: 1.23” stud: 4.125”
|
|
 |
|
|
|
|
 |
FREE SHIPPING- Quik Latch Billet Midi-Hood Pins, Pair
|
|

Free US Shipping!
The latest innovation from Quik
Latch- they listened to requests and developed these pins, in between their large and minis for people with less load requirements. Perfect for fiberglass hoods! (Smaller diameter will not work on hoods that have already had the big style of old school pins.)
Quiklatch are a new generation of hood fasteners that far surpass
traditional hood pins in both style and functionality. They solve these
problems with a sleek and simple yet elegant snap shut and quick
release action. They mount to the hood and line up with studs placed on the core
support or other bracket. Once the hood is closed, Quik Latch
automatically latch to the studs and will not release until the center
button on the top of the mechanism is depressed. They will not rust, can
be painted to match your paint and are Made in the USA. They’re even
approved for use by the NHRA if that gives you any idea of the quality! We have the larger version of these on Hobby Horse and the Monster Garage Bronco along with the Minis for
the body panels.
Comparison: 7330/31: 700# static pull force per latch 2.5" OD 7332/7333: 500# static pull force per latch 1.75" OD 7335: 150# static pull force per latch 1.25" OD
|
|
 |
|
|
|
|
 |
FREE SHIPPING- Quik Latch Locking Billet Midi-Hood Pins, Pair
|
|

Free US Shipping!
The latest innovation from Quik
Latch- they listened to requests and developed these pins, in between their large and minis for people with less load requirements and more affordable too. Perfect for new fiberglass hoods! (Smaller diameter will not work on hoods that have already had the big style of old school pins.)
Quiklatch are a new generation of hood fasteners that far surpass
traditional hood pins in both style and functionality. They solve these
problems with a sleek and simple yet elegant snap shut and quick
release action. They mount to the hood and line up with studs placed on the core
support or other bracket. Once the hood is closed, Quik Latch
automatically latch to the studs and will not release until the center
button on the top of the mechanism is depressed. They will not rust, can
be painted to match your paint and are Made in the USA. They’re even
approved for use by the NHRA if that gives you any idea of the quality! We have the larger version of these on Hobby Horse and the Monster Garage Bronco along with the Minis for
the body panels.
Comparison: 7330/31: 700# static pull force per latch 2.5" OD 7332/7333: 500# static pull force per latch 1.75" OD 7335: 150# static pull force per latch 1.25" OD
|
|
 |
|
|
|
|
 |
FREE SHIPPING- Quik Latch Billet Hood Pins, Pair
|
|

Free US Shipping!
Quik Latch has developed a new generation of hood fasteners that far surpass traditional hood pins in both style and functionality. They solve these problems with a sleek and simple yet elegant snap shut and quick release action. Quik Latch hood fasteners mount to the hood (you can use your existing pin holes), and line up with studs placed on the core support or other bracket. Once the hood is closed, Quik Latch automatically latch to the studs and will not release until the center button on the top of the mechanism is depressed. They will not rust, can be painted to match your paint and are Made in the USA. They’re even approved for use by the NHRA if that gives you any idea of the quality! Michael has these on the Monster Garage Bronco along with the Minis for the body panels.
Comparison: 7330/31: 700# static pull force per latch 2.5" OD 7332/7333: 500# static pull force per latch 1.75" OD 7335: 150# static pull force per latch 1.25" OD
|
|
 |
|
|
|
|
 |
FREE SHIPPING- Quik Latch Billet Locking Hood Pins, Pair
|
|

FREE US Shipping!
Tired of the traditional hood pins that rust? Have you lost your hood pins due to removing the lanyard in hopes of protecting the paint? Had a hood fly up due to forgetting to put them back in? We can say yes to all of those!
Quik Latch has developed a new generation of hood fasteners that far surpass traditional hood pins in both style and functionality. They solve these problems with a sleek and simple yet elegant snap shut and quick release action. Quik Latch hood fasteners mount to the hood (you can use your existing pin holes), and line up with studs placed on the core support or other bracket. Once the hood is closed, Quik Latch automatically latch to the studs and will not release until the center button on the top of the mechanism is depressed. They will not rust, can be painted to match your paint and are Made in the USA. They’re even approved for use by the NHRA if that gives you any idea of the quality! Michael has these on the Monster Garage Bronco along with the Minis for the body panels.
These feature a locking option so that you can keep the valuable parts underneath your hood secure. Push button release when unlocked. Once the lock is engaged, the button is locked into place and cannot be depressed to release the latch.
Comparison: 7330/31: 700# static pull force per latch 2.5" OD 7332/7333: 500# static pull force per latch 1.75" OD 7335: 150# static pull force per latch 1.25" OD
|
|
 |