Telephone _ James Duff, Inc.

865.938.6696

M-F 10-6 EST

You are here: Home > Suspension > Builder Parts
Builder Parts Suspension Steering Fab DIY Heims Rod Ends Weld in bungs
Sort By:
Page of 1
3/4"-16 Jam Nut for 3/4" Rod End Heim Joint Bung Suspension Steering Custom Fab Link Bung
3/4"-16 Jam Nut for 3/4" Rod End
Our Price: $3.00

We are now offering these high quality components from our suspensions individually. These jam nuts work with our high quality Rod Ends (#8702), which feature a tough, self-lubricating, self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. The rod ends and weld-in adapters (# 8712) are sold separately. These are the same high quality parts we use for items like our Extended Travel Radius Arms (#5350 and #5351), heim steering systems (#5640), torque tamers (#532X) and 4-links (#536X), although sizes may vary depending upon the application.


more info
1.25"-12 Jam Nut for 1" Rod End Heim Joint Suspension Steering Custom Fab Bung Link
1.25"-12 Jam Nut for 1" Rod End
Our Price: $4.00

We are now offering the great high quality components from our suspensions separately. These high quality Rod Ends feature a tough selflubricating, self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. Jam nuts sold separately. Weld in adapters are the same we use for our Radius Arms, 4 link Suspensions and Torque Tamers.


more info
3/4" Weld-in Threaded Rod End Adapter (1.25"ID) Heim Joint Steering Suspension Custom Fabrication Link Tube Bung
3/4" Weld-in Threaded Rod End Adapter (1.25"ID)
Our Price: $15.00

We are now offering these great high quality components from our suspensions individually. We build these inserts in-house, from thick-wall, DOM tube. The Rod Ends we offer feature a tough self-lubricating, self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. Jam nuts (PN 8722) and rod ends (PN 8702) are sold separately. These are the same high quality parts we use for items like our Extended Travel Radius Arms (PN 5350 and 5351), heim steering systems (PN 5640), torque tamers (PN 532X), and 4-links (PN 536X), although sizes may vary depending upon the application.


more info
1.25" Weld-in Threaded Rod End Adapter (1 3/8" ID) Heim Joint Steering Suspension Custom Fab Link Bung Plug
1.25" Weld-in Threaded Rod End Adapter (1 3/8" ID)
Our Price: $20.00

We are now offering the great high quality components from our suspensions separately. These high quality Rod Ends feature a tough selflubricating, self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. Jam nuts sold separately. Weld in adapters are the same we use for our Radius Arms, 4 link Suspensions and Torque Tamers.


more info
3/4" Rod End Heim Joint Steering Suspension Link Custom Fabrication
3/4" Rod End
Our Price: $25.00

We are now offering these high quality components from our suspensions individually. These high quality Rod Ends feature a tough, self-lubricating, self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. Jam nuts (PN 8722) and weld-in adapters (PN 8712) are sold separately. These are the same high quality parts we use for items like our Extended Travel Radius Arms (PN 5350 and 5351), heim steering systems (PN 5640), torque tamers (PN 532X) and 4-links (PN 536X), although sizes may vary depending upon the application.



more info
1" x 1.25" Diameter Rod End Heim Joint Steering Suspension Link Fabrication Custom
1" x 1.25" Diameter Rod End
Our Price: $55.00

We are now offering the great high quality components from our suspensions separately. These high quality Rod Ends feature a tough selflubricating, self-sealing Teflon/Kevlar liner and increased cross-sectional thickness for greater tensile strength. Jam nuts sold separately. Weld in adapters are the same we use for our Radius Arms, 4 link Suspensions and Torque Tamers.



more info
Ford Dana 30 Dana 44 Dana 60 Axle Wedges (4) Weld On
Axle Wedges, Weld On, Dana 30, Dana 44, Dana 60
Our Price: $114.95

For the Bronco owner that is swapping front axles, these wedges make it much easier. No need to cut up a good front axle just for parts. These wedges are designed to weld onto a 2 3/4 O.D. tube, just like a factory Early Bronco Dana 44 but are easily modified to fit onto 3 O.D. tubing found on high pinion Dana 44 and (Dana 60 will require grinding or using 5351-60 Spacers). Cast with all the correct configurations to fit the inside of a C bushing exactly like original.


more info
Radius Arm C Caps, Ford Dana 30 Dana 44 or Dana 60 Solid Axle Swap
Radius Arm C Caps, Dana 30 Dana 44 or Dana 60
Our Price: $139.95

Exact reproductions of stock caps, cast of ductile steel. Combine with our Radius Arms and Axle Wedges and you can put a Dana 44 or 60 under just about anything! One pair, come bare.


Add a fresh (#HC5341) installation kit to replace your 50+ year old factory bolts, includes qty 8 grade eight bolts and lock washers, plus two long grade 5 bolts & flat washers for the headunit to assist in assembly.

This works for the following applications:
  • 66-79 Broncos
  • 66-79 F150 4x4


more info
Early Classic Bronco Heavy Duty Replacement Coil Spring Towers Buckets Custom Fab
Heavy Duty Coil Spring Towers, Short
Our Price: $139.95

Doing a four link or something custom? Our exclusive, heavy duty coil spring towers, built from 1/4" plate steel, work great for those doing a custom suspension. These are our "rear" design towers and are the ones that we include with our four link systems. They are 4" shorter than the "tall" type (#5110). Will work with Early Bronco or Big Bronco coil springs (5.5" diameter.) Welding required on Early Bronco. For installation on C-channel frames, these towers must be drilled and bolted to the frame (we recommend using a counter sunk bolt). Your frame may or may not have existing holes to work with. Zinc plated, sold in pairs. Zinc plated upper coil retainer tabs are included (also available separately #5100).


more info
Full Width Axle Offset Coil Buckets 1966-77 Classic Early Ford Bronco
Full Width Offset Coil Buckets, 1966-77 Bronco
Our Price: $179.95

Running "full width" axles on your Early Bronco? Our exclusive, heavy duty coil spring towers, built from 1/4" plate steel, are designed specifically for swapping in a full width and may be just what you need! Each tower is offset approximately 2" away from the frame. This helps to line up your coils over the wider axle. Welding is required. Like our others, these towers work with Early Bronco or 78-79 Bronco (5 1/2 diameter) coil springs. Zinc plated, sold in pairs. Zinc plated upper coil retainer tabs are also included (also available separately #5100).


more info