Product Code: 4938/4939

Bronco II Rear Plate Bumper with Tire Carrier and Optional Can Rack

$649.95$1,614.90

I have read and understood all product copy and disclaimers listed below.

Earn up to 1,615 DuffBucks.

(2 customer reviews)

As of December 2023 this product has been discontinued.

Frequently Asked Questions
Before Purchasing:
  • You will be contacted within 2-3 business days after purchase to pay for shipping and make arrangements. Smoothy bumpers come with the knockouts left intact and it is my responsibility to weld or body fill them smooth if that is my preference. All Bumpers are shipped bare and unboxed via ground. You should not paint or powder coat bumpers until all components have been test fit to the vehicle.
  • We do not sell the cooler rack addition for Bronco II, it will bolt on but the hatch will not clear the basket to open all the way.
  • Bumpers typically take 2 weeks to ship but until further notice, some bumpers are taking 4-6 weeks. Bumpers release to ship as soon as they are available so if I do not want them to ship early it is up to me to communicate that when I make my purchase.
  • Can carrier is not included but can be added and only offered on the passenger side.
  • If you have a body lift this bumper cannot be moved up to hide it. You will need to make a filler panel to cover the gap.
  • If you have an '83-'92 Ranger or B2000 of that era and are interested in the 4938 (no pivots) plate bumper contact us. We do not recommend mounting the 4939 (plate bumper with pivots) to these vehicles due to the mounting bracket design and excessive weight created at the rear of the vehicle creating an unsafe set up for you and others on and off-road.
  • If you have a '91-'94 Explorer or Navajo of that era and are interested in these bumpers contact us.
  • Fitment issues discovered after the bumper has been painted or powder coated will be the customer's financial responsibility to fix.
  • If you do experience fitment issues with the vehicle be sure to verify it has not been modified or in an accident before calling James Duff.

Introducing the James Duff HD rear plate bumper for the Bronco 2.

Choose from a hand-built plate bumper with a built-in receiver and hi-lift jacking points or the whole enchilada including a tire carrier & optional can carrier. Consider pairing it with our Bronco 2; GEN 1 or GEN 2 plate front bumper

All B2 rear plate Bumpers come standard with:

  • Receiver
  • Hi-lift jacking points
  • 3/16 plate steel shell
  • 1/4 plate steel end caps, frame mounts, and gussets

The B2 bumper with tire carrier comes standard with:

  • Pivot points on the driver and passenger side
  • Tire carrier - only offered on the passenger side
  • Tire carrier comes standard with:
  • Hi-lift jack mount
  • Cam style latch
  • Double shear pivot mount
  • Lockout pin
  • Bronze oil lite bushings

Stock tire carriers just don’t stand up to the weight of an oversize tire. The extra weight can cause the factory mounts on the quarter panel to tear. So, we designed a carrier system utilizing our proven heavy-duty yet lightweight plate bumper. The rear plate bumper is made of 3/16″ steel with 1/4″ endplates, frame mounts, and gussets. We add strength in all the important spots. It will carry up to a 35″ tire while also providing a location for a Hi-Lift Jack. The spare tire mounts to the carrier with pressed-in wheel studs and included lug nuts (you can also use standard locking lug nuts for added security). The jack sits on a steel base and is secured with a T-handle.

Access to your liftgate is quick and easy thanks to our simple but effective cam-latch design. The hinge pivots feature oil-impregnated brass bushings for long life. A drop pin automatically holds the carrier open so there is no fear of it swinging in either direction.

The optional carrier basket (#4981, sold separately) is set up for a 5 gallon Gerry can, but readily accepts water, antifreeze jugs, or a trash can! Mounting hardware is included. Ships bare so that you can finish to your liking.

Consider the #4934, our winch plate bumper for the front of your Bronco II (#4933 for 89-90 model years).

Weight 70 lbs
Dimensions 52 × 10 × 10 in
Choose Option

Tire Carrier Only, No Can Rack, With Can Rack with Pivots, No Pivots, No Can Rack or Tire Carrier

2 reviews for Bronco II Rear Plate Bumper with Tire Carrier and Optional Can Rack

  1. Sean M (verified owner)

    This bumper is amazing! I bought it for my ’89 Bronco II. This product is far better than any other bumper I have ordered from other vendors. The welds are solid, the shape and lines are well though out, the tire carrier fits like a glove and nothing wiggles around at all. What more can I say? Don’t think, just buy one. I would suggest you get the gas can swing-out as well. I didn’t get one when I ordered the bumper. After I installed it, I immediately regretted not getting the can swing-out and ordered on that same day.

  2. John Stanley

    I bought this bumper and the front winch plate bumper along with a lot of other James Duff parts for my 1984 Bronco II.

    This rear bumper is amazingly strong. I mounted a Hi-Lift Jack on the rear bumper and went thru a car wash and the Hi-Lift Jack got caught on the top of the car wash machine due to the jack sticking up above the top of my Bronco top. THE JACK BENT !!! the bumper did not budge and the tire carrier works perfect, NOW THAT IS ONE STRONG BUMPER AND TIRE CARRIER.

    James Duff sells excellent products. Highly Recommend

    http://www.broncoiicorral.com/gallery2/main.php?g2_itemId=3468

    Here is my Bronco II with a conversion to a Cummins 4bt diesel. 🙂

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Shopping Cart
Scroll to Top