Telephone _ James Duff, Inc.

865.938.6696

M-F 10-6 EST

You are here: Home > Early Bronco 1966-1977 > Cooling
Sort By:
Page of 2
Water Pump Bypass Hose V8 Engine Conversion 90° thermostat Ford Small Block
90 Water Pump Bypass Hose, V8
Our Price: $11.85

Water Pump Bypass Hose with a 90 bend molded in to go with our 90 Thermostat for all 289/302/351W V8. Necessary for most Bronco II, 83-97 Ranger or 91-94 Explorer V8 Conversions.


Illuminated Switch for Electric Fan Bronco II, Ranger, 1966-77 Classic Early Bronco Ford
Illuminated Switch for Electric Fan
Our Price: $19.95

20amp Green Illuminated Switch for On/Off of your Flex-a-lite Fan.


Defroster Heater Hose 1966-77 Classic Early Vintage Ford Bronco C5ZZ-18556-A
Defroster Hose, 1966-77 Bronco pr
Our Price: $19.95

1966-77 Bronco defroster hoses are authentic flex style made from a more modern polypropylene coated fabric and cam-lock clamps for a quick and secure installation. Sold as a pair.
90° Thermostat Housing Bronco Ranger Explorer Thermostat housing 90° outlet Early Bronco, Bronco II, 83-97 Ranger 91-94 Explorer V8/5.0 Conversion
90 Thermostat Housing
Our Price: $29.95

Thermostat housing with a 90 outlet for your 289 302 351W Small Block Ford V8 in Early Bronco, Bronco II, 83-97 Ranger or 91-94 Explorer V8/5.0 Conversion.


Billet Aluminum Radiator Cap, 16lb. 1966-77 Ford Classic Early Bronco
Billet Aluminum Radiator Cap, 16lb.
Our Price: $36.95

Give your aluminum radiator a finished look with this billet cap. A 16lb. pressure cap is siliconed inside the finished billet cap. This allows you to replace the pressure cap if it was ever to fail.


4 Core Stainless Radiator Brackets, 1966-77 Early Classic Ford Bronco
4 Core Stainless Radiator Brackets, 1966-77 Bronco
Our Price: $44.95

These stainless brackets come with black rubber insulating bushings. Sized for the added depth of the 4-core radiator and are needed for installation. Will not fit 3-cores. Measure 3.5" for reference for other applications.
3 Core Stainless Radiator Brackets, 1966-77 Early Classic Ford Bronco
3 Core Stainless Radiator Brackets, 1966-77 Bronco
Our Price: $44.95

These stainless brackets come with black rubber insulating bushings. Sized for the depth of the 3-core radiator and are needed for installation. Will not fit 4-cores. Measure 2.5" for reference for other applications.
Adjustable Temp Sensor for Electric Fan, 1966-77 Classic Early Bronco Ford Bronco II, Ranger, Explorer
Adjustable Temp Sensor for Electric Fan
Our Price: $49.95

Adjustable Thermostatic Temperature Sensor Switch for Flex-a-lite Electric Fan Fan Control, 160 to 240 Degrees 20amp


Silicone Radiator Hose Kit V8 1966-77 Classic Early Vintage Ford Bronco 302 351w 289
Silicone Radiator Hose Kit, V8, 1966-77 Ford Bronco
Our Price: $79.95
Sale Price: $69.95
You save $10.00!

Black silicone lasts longer and has a higher burst pressure than regular rubber hoses. Set includes upper, lower, and bypass hose. Nylon reinforced lower hose has stainless steel spring to prevent any possible collapse. Fits 289/302/351W (does not fit 5.0 or 5.8 reverse flow conversion).


Bilt Cool Ventilated Stainless Inner Fender Panel Set 1966-77 Classic Early Ford Bronco Cooling Overheating
Bilt Cool Ventilated Stainless Inner Fender Panel Set, 1966-77 Bronco
Our Price: $125.95

16 gauge brushed Stainless Bilt Cool panels replace the vertical center section of your inner fenders--letting the hot air escape from around the headers or manifolds.  Some people completely remove the inners but using these leaves the original structure intact for front clip strength. Gives a nice finished look to your wells and provides a bit of a barrier against debris. Lowers engine temperature approximately 10.