865.938.6696

M-F 10-6 EST

You are here: Home > Ranger 1983-97 > Cooling
Sort By:
Page of 2
Water Pump Bypass Hose V8 Engine Conversion 90° thermostat Ford Small Block
90 Water Pump Bypass Hose, V8
Our Price: $11.85

Water Pump Bypass Hose with a 90 bend molded in to go with our 90 Thermostat for all 289/302/351W V8. Necessary for most Bronco II, 83-97 Ranger or 91-94 Explorer V8 Conversions.
Illuminated Switch for Electric Fan Bronco II, Ranger, 1966-77 Classic Early Bronco Ford
Illuminated Switch for Electric Fan
Our Price: $19.95

20amp Green Illuminated Switch for On/Off of your Flex-a-lite Fan.
V8 302 5.0 efi Engine Conversion Upper Radiator Hose Ford Bronco II Ranger
V8 Upper Radiator Hose Bronco II/RGR
Our Price: $25.25

Upper Radiator Hose to go with our Aluminum Radiator on a V8 conversion in a Bronco II, 83-97 Ranger or 91-94 Explorer.
V8 302 5.0 efi Engine Conversion Lower Radiator Hose Ford Bronco II Ranger
V8 Lower Radiator Hose Bronco II
Our Price: $25.25

Lower Radiator Hose to go with our Aluminum Radiator on a V8 conversion in a Bronco II, 83-97 Ranger or 91-94 Explorer.
V8 302 5.0 efi Engine Conversion Upper Radiator Hose Ford Bronco II Ranger
5.0 Upper Radiator Hose for Serpentine B2, R, Explorer
Our Price: $25.25

Upper Radiator Hose for our Aluminum Radiator with a 5.0 conversion in a Bronco II, 83-97 Ranger or 91-94 Explorer with a Serpentine Belt System.
90° Thermostat Housing Bronco Ranger Explorer Thermostat housing 90° outlet Early Bronco, Bronco II, 83-97 Ranger 91-94 Explorer V8/5.0 Conversion
90 Thermostat Housing
Our Price: $29.95

Thermostat housing with a 90 outlet for your 289 302 351W Small Block Ford V8 in Early Bronco, Bronco II, 83-97 Ranger or 91-94 Explorer V8/5.0 Conversion.
Billet Aluminum Radiator Cap, 16lb. 1966-77 Ford Classic Early Bronco
Billet Aluminum Radiator Cap, 16lb.
Our Price: $36.95

Give your aluminum radiator a finished look with this billet cap. A 16lb. pressure cap is siliconed inside the finished billet cap. This allows you to replace the pressure cap if it was ever to fail.
Adjustable Temp Sensor for Electric Fan, 1966-77 Classic Early Bronco Ford Bronco II, Ranger, Explorer
Adjustable Temp Sensor for Electric Fan
Our Price: $44.95

Adjustable Thermostatic Temperature Sensor Switch for Flex-a-lite Electric Fan Fan Control, 160 to 240 Degrees 20amp
1966-77 Early Classic Bronco Power Steering Cooler Ford Jeep
Power Steering Cooler
Our Price: $89.95

Slow speed four wheeling, big tires or a front locker make the power steering pump work harder. This produces excessive heat buildup, which if not released will drastically shorten the life of the pump and the box seals. Ensure the longevity of your power steering system with the addition of this high quality US Made heavy duty four pass fluid cooler. 3/4 x 5 x 7.5 cooler is designed to fit in front of the cowl for optimum airflow and cooling. Comes with necessary hose and clamps for mounting. A must have for any serious four wheeler.
16" Puller Fan Bronco II Ranger V8 Conversion
16" Puller Fan Bronco II/Ranger V8 Conversion
Our Price: $140.00

On some V8 conversions, you will be able to retain a stock mechanical fan. If have located your engine correctly, you will have .5" to 1.5" of clearance between the fan and radiator. However, many variations require the use of an electric fan. In those cases, we offer a 16" Flex-a-lite puller fan. The temperature sensor and manual switches are sold separately so you can decide which you prefer. The fan has a rating of 2215 CFM and draws 11 amps. It is best to mount the fan slightly towards the passenger side of the radiator to prevent interference with the water pump pulley.